Standartlar | Page 10 of 46 | ParsRos Malzeme Test Cihazları

ASTM D3811 – Unwind Force of Pressure-Sensitive Tapes

0 out of 5

ASTM D3811 characterizes a test for measuring the peak force needed to unwind a roll of pressure-sensitive adhesive (PSA) tape.

The procedure is intended to simulate unwind tape either with a human…
ASTM D3846 Test Fikstürü

0 out of 5

ASTM D3846 covers the determination of the inplane shear strength of reinforced thermosetting plastics in flat sheet form
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ASTM D395 – Rubber Property — Compression Set

0 out of 5

ASTM D395 – This test method covers the testing of rubber intended for use in applications in which the rubber will be subjected to compressive stresses in air

or liquid media.
Bilgi Almak…
ASTM D3967 – Splitting Tensile Strength of Intact Rock Core Specimens

0 out of 5

ASTM D3967 – This test method covers testing apparatus, specimen preparation, and testing procedures for determining the splitting tensile strength of rock by
diametral line compression of disk shape specimens.

Bilgi Almak İçin…
ASTM D4032 Test Fikstürü

0 out of 5

ASTM D4032 covers the determination of the stiffness of fabrics by the circular bend procedure.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ASTM D412 – Vulcanized Rubber and Thermoplastic Elastomers—Tension

0 out of 5

ASTM D412 – This test method covers procedures used to evaluate the tensile (tension) properties of vulcanized thermoset rubbers and thermoplastic elastomers.
These methods are not applicable to ebonite and similar hard,…
ASTM D413 – Rubber Property—Adhesion to Flexible Substrate

0 out of 5

ASTM D413 – This test method covers the determination of the adhesion strength between plies of fabric bonded with rubber or the adhesion of the rubber layer in

articles made from rubber…
ASTM D4255 – Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method

0 out of 5

ASTM D4255 – A Testing Fixture

ASTM D4255 – This test method indicates the cutting properties in the plane of a high modulus fiber-reinforced composite materials by two procedures.
Bilgi Almak İçin Lütfen…
ASTM D429 Test Fikstürü

0 out of 5

ASTM D429 covers procedures for testing the static adhesional strength of rubber to rigid materials (in most cases metals).
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ASTM D4475 Test Fikstürü

0 out of 5

ASTM D4475 covers the determination of the apparent horizontal shear strength of fiber reinforced plastic rods.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ASTM D4501 – Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method

0 out of 5

Block-Shear Strength Test
ASTM D4501 – This test method describes a procedure and fixture used to determine shear strengths of adhesives used to bond materials with moduli higher than

the modulus of the…
ASTM D4533 Test Fikstürü

0 out of 5

ASTM D4533 is an index test used to measure the force required to continue or propagate a tear in woven or nonwoven geotextiles by the trapezoid method.
Bilgi Almak İçin Lütfen…

ASTM D3811 – Unwind Force of Pressure-Sensitive Tapes

ASTM D3846 Test Fikstürü

ASTM D395 – Rubber Property — Compression Set

ASTM D3967 – Splitting Tensile Strength of Intact Rock Core Specimens

ASTM D4032 Test Fikstürü

ASTM D412 – Vulcanized Rubber and Thermoplastic Elastomers—Tension

ASTM D413 – Rubber Property—Adhesion to Flexible Substrate

ASTM D4255 – Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method

ASTM D429 Test Fikstürü

ASTM D4475 Test Fikstürü

ASTM D4501 – Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method

ASTM D4533 Test Fikstürü

SİTE İÇİ GEZİNTİ

ÇALIŞMA SAATLERİ