• ISO/TS 11405 - Testing of Adhesion to Tooth Structure

    ISO/TS 11405 – Testing of Adhesion to Tooth Structure
    0 out of 5

    This ISO standard gives guidance on substrate selection, storage, and handling as well as essential characteristics of different test methods for quality testing of

    the adhesive bond between restorative dental materials…

  • ISO/TS 19736 - Bonding Test Between Polymer Teeth and Denture Base Materials

    ISO/TS 19736 – Bonding Test Between Polymer Teeth and Denture Base Materials
    0 out of 5

    ISO/TS 19736 specifies a test method for bonding of polymer teeth to denture base materials.

    Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz

  • NASM 1312-13 Test Fikstürü

    NASM 1312-13 Test Fikstürü
    0 out of 5

    The Aerospace Industries Association publishes NASM 1312-13, Fastener Test Methods for Double Shear Tests.
    Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz 

  • NASM 1312-20 Test Fikstürü

    NASM 1312-20 Test Fikstürü
    0 out of 5

    MIL-STD-1312-20 / NASM 1312-20 – These fixtures are used to test, in single shear, fasteners (typically metallic) which are not long enough to be tested in double shear.
    Bilgi Almak İçin…

  • TAPPI T 456 Test Fikstürü

    TAPPI T 456 Test Fikstürü
    0 out of 5

    TAPPI T 456 describes the procedure for the determination of the tensile strength of paper and paperboard after saturation with water.
    Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz 

  • TAPPI T 549 Test Fikstürü

    TAPPI T 549 Test Fikstürü
    0 out of 5

    TAPPI T 549 describes a horizontal plane procedure for the determination of the coefficient of static and kinetic friction of paper measured when sliding against itself.
    Bilgi Almak İçin Lütfen Bizimle <a…</a…

  • TAPPI T 811 Test Fikstürü

    TAPPI T 811 Test Fikstürü
    0 out of 5

    TAPPI T 811 describes procedures for determining the edgewise compressive strength (ECT), perpendicular to the axis of the flutes, of a short column of single-, double-,

    or triple-wall corrugated fiberboard
    Bilgi Almak…

  • TAPPI T 822 Test Fikstürü

    TAPPI T 822 Test Fikstürü
    0 out of 5

    TAPPI T 822 – The ring crush test correlates with edgewise compression strength of paperboard (1,2).
    Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz 

  • Yer tutucu

    TAPPI T 825 Test Fikstürü
    0 out of 5

    TAPPI T 825 – The flat crush test (1) is a measure of the resistance of the flutes in corrugated board to a crushing force applied perpendicular to the surface

    of…

  • TAPPI T 829 Test Fikstürü

    TAPPI T 829 Test Fikstürü
    0 out of 5

    TAPPI T 829 describes a qualitative method for evaluating the relative quality of scores in corrugated containers
    Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz 

  • TAPPI T231 Test Fikstürü

    TAPPI T231 Test Fikstürü
    0 out of 5

    TAPPI T231 provides a quick, reliable means to measure the zero-span tensile strength of a randomly oriented specimen of fibers when dry.
    Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz 

  • TAPPI T821 Test Fikstürü

    TAPPI T821 Test Fikstürü
    0 out of 5

    TAPPI T821 is used to measure the force required to separate corrugated board between the flute tips of corrugated medium and its linerboard facings.
    Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz