Standartlar | Page 45 of 46 | ParsRos Malzeme Test Cihazları

ISO 8493 – Drift Expanding Test

0 out of 5

ISO 8493 – In the drift-expanding test, a conical mandrel is pressed into a tube specimen via materials testing machine according to the tube’s inner diameter and the tube

is expanded.
Bilgi…
ISO 8494 – Flanging Test

0 out of 5

ISO 8494 specifies a method for determining the ability of metallic tubes of circular cross-section to undergo plastic deformation during flange formation.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO 8510-1 Adhesive Peel Test

0 out of 5

ISO 8510-1 Particularly suitable for use with less flexible adherends for which a 180 ° peel test is not suitable because the adherends crack, break or delam
Bilgi Almak İçin Lütfen…
ISO 9046 – Adhesion/Cohesion Properties of Sealants at Constant Temperature

0 out of 5

This ISO standard specifies a method for the determination of the adhesion/cohesion properties of sealants with predominantly plastic behaviour which are used

in joints in building construction.
Bilgi Almak İçin Lütfen Bizimle <a…</a…
ISO 9073 Textiles Test Equipment

0 out of 5

ISO 9073-18 specifies a grab tensile test procedure for determining the breaking strength and elongation of most nonwoven materials
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO 9073-5 Mechanical Penetration of Nonwoven Fabrics

0 out of 5

ISO 9073-5 specifies a method for determining the resistance to mechanical penetration of nonwoven fabrics by a ball of a given diameter.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO 9073-7 Bending Length of Nonwowens Textiles

0 out of 5

ISO 9073-7 specifies a method for the determination of the bending length of nonwovens. Gives an equation for calculating the flexural rigity of the fabric from the bending length.
Bilgi Almak…
ISO 9187-1 Injection Equipment for Medical Use

0 out of 5

ISO 9187-1 specifies materials, dimensions, capacities, performance and packaging requirements for three forms of glass ampoule (forms B, C and D) for injectable

pharmaceutical products.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO 9311-2 Shear Strength of Adhesives

0 out of 5

This ISO standard specifies a method for the determination of the shear strength of joints made with adhesives for thermoplastic piping systems.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO 9626 – Stainless Steel Needle Tubing for the Manufacture of Medical Devices

0 out of 5

ISO 9626 applies to rigid stainless steel needle tubing suitable for use in the manufacture of hypodermic needles and other medical devices primarily for human use.
Bilgi Almak İçin Lütfen Bizimle <a…</a…
ISO/IEC 10373-1 Cards and Security Devices for Personal Identification

0 out of 5

ISO/IEC 10373-1 the test methods for characteristics of identification cards according to ISO/IEC 7810 and other standards, such as those listed in the Introduction.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO/IEC 7810 – Physical Characteristics of Identification Cards

0 out of 5

ISO/IEC 7810 describes the characteristics for identification cards and the use of such cards for international interchange.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz