ISO 8510-1 Adhesive Peel Test
ISO 8510-1 Particularly suitable for use with less flexible adherends for which a 180 ° peel test is not suitable because the adherends crack, break or delam
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
- Değerlendirmeler (0)
- TEKNİK ÖZELLİKLER
ISO 8510-1 – Adhesives — Peel Test for a Flexible-Bonded-to-Rigid Test Specimen Assembly
Part 1: 90 degree peel
ISO 8510-1 Particularly suitable for use with less flexible adherends for which a 180 ° peel test is not suitable because the adherends crack, break or delaminate.
A bonded assembly of two adherends is prepared using the adhesive under test.
The adherends are then pulled apart at a steady rate, starting at the open end of the bond, in such a way that separation occurs progressively along the length of the
The force is applied approximately normal to the plane of the bond, through the separated part of the flexible adherend. A figure shows a schematic diagram.
*** Before conducting this ISO standard , it is important to read the entire specification. Standards can be obtained from appropriate standard authorities.
***PARSROS offers several types of grips and fixtures which will enable you to perform a variety of tests
that are accurate and repeatable
Henüz değerlendirme yapılmadı.