-
ASTM D6636 – Ply Adhesion Strength of Reinforced Geomembranes
ASTM D6636 – This test method covers the measurement of the adhesion strength (180° peel) between plies of reinforced geomembranes such as internally
reinforced geomembranes and coated fabrics.
Bilgi Almak İçin Lütfen Bizimle <a…</a… -
ASTM D6641 – Compressive Properties of Polymer Matrix Composite Materials
ASTM D6641 – Combined loading compression test fixture
ASTM D6641 – This test method determines the compressive strength and stiffness properties of polymer matrix composite materials using a combined loading
compression (CLC) (1)… -
ASTM D6671 – Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
ASTM D6671 – MIXED-MODE BENDING FRACTURE TOUGHNESS
ASTM D6671 – This test method covers the determination of interlaminar fracture toughness, Gc, of continuous fiber-reinforced composite materials at various Mode
I to Mode II loading… -
ASTM D6742 Test Fikstürü
ASTM D6742 provides instructions for modifying open-hole tension and compression test methods to determine filled-hole tensile and compressive strengths.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz -
ASTM D6775 Test Fikstürü
ASTM D6775 covers the determination of the breaking strength and elongation of textile webbing, tape and braided materials using a split-drum type specimen clamp.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz -
ASTM D6797 Test Fikstürü
ASTM D6797 describes the measurement for bursting strength of woven and knitted textiles taken from rolls of fabric or fabric taken from garments.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz -
ASTM D6862 – Standard Test Method for 90 Degree Peel Resistance of Adhesives
Peel strength testing for adhesive tapes can be performed using different test procedures.
The 90 degree peel test is one of the most common since this test generally results in the…
-
ASTM D6873 Test Fikstürü
ASTM D6873 provides instructions for modifying static bearing test methods to determine the fatigue behavior of composite materials subjected to cyclic bearing forces.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz -
ASTM D695 – Compressive Properties of Rigid Plastics
ASTM D695 – describes a test method for rigid plastics in compression. There are a few variations in the test, depending on the size of the sample being used.
The test can be…
-
ASTM D7078 – Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM D7078 – This test method covers the determination of the shear properties of high-modulus fiber-reinforced composite materials by clamping the ends of a
V-notched specimen between two pairs of loading rails.
Bilgi… -
ASTM D7084 Test Fikstürü
ASTM D7084 covers the determination of bulk crush strength of a bed of formed catalyst particles
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz -
ASTM D7137 – Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
ASTM D7137 – This test method covers compression residual strength properties of multidirectional polymer matrix composite laminated plates, which have
been subjected toquasi-static…
- TR | EN
- Tel : 0 (312) 394 28 68
- WhatsApp: 0546 437 05 06