-
ASTM C633 – Adhesion or Cohesion Strength of Thermal Spray Coatings
ASTM C633 – This test method covers the determination of the degree of adhesion (bonding strength) of a coating to a substrate or the cohesion strength of the coating
in a tension… -
ASTM D1002 – Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D1002 – This Standard determines the shear strength of adhesives for bonding metals when tested on a single-lap-joint specimen.
The test is applicable for determining adhesive strength, surface preparation parameters,…
-
ASTM D1414 – Rubber O-Rings
ASTM D1414 – This test method describes the procedures for determining the physical properties of O-rings and changes in these properties due to aging.
Rubber bands are also commonly tested under this… -
ASTM D143 – Small Clear Specimens of Timber
ASTM D143 – This test method covers the determination of various strength and related properties of wood by testing small clear specimens.
This test method represents procedures for evaluating the different… -
ASTM D1781 – Standard Test Method for Climbing Drum Peel for Adhesives
ASTM D1781 -This test method is used to compare adhesion between flexible and rigid adherends, or between flexible facing of a sandwich structure and its core.
Comparisons of adhesives and processes…
-
ASTM D1876 – Peel Resistance of Adhesives (T-Peel Test)
ASTM D1876- This test method is the most common peel test because it does not require any additional equipment beyond the grips.
This test is optimized for tapes with flexible backings, or…
-
ASTM D3167 – Floating Roller Peel Resistance of Adhesives
The Floating Roller Peel Test is one of the most common procedures for testing packaging tapes since it closely simulates real world applications.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM D3330 – Peel Adhesion of Pressure-Sensitive Tape
ASTM D3330 specifies several test methods for determining the peel strength of Pressure Sensitive Adhesives (PSA).
There are 6 test methods called out in the specification.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM D3410 – Standard Test Method for Compressive Properties of Polymer Matrix
ASTM D3410 | Composites | Shear Testing
ASTM D3410 is a testing standard designed to measure the compressive properties of polymer matrix composite materials reinforced by high-modulus fibers.
This test procedure introduces the compressive force…
-
ASTM D3759 – Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes
ASTM D3759 is used to characterize the breaking strength, elongation, and “F” value of PSA tapes. Tapes are commonly pulled in the tensile mode during application
and final usage.
Bilgi Almak İçin…
-
ASTM D395 – Rubber Property — Compression Set
ASTM D395 – This test method covers the testing of rubber intended for use in applications in which the rubber will be subjected to compressive stresses in air
or liquid media.
Bilgi Almak…
-
ASTM D412 – Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D412 – This test method covers procedures used to evaluate the tensile (tension) properties of vulcanized thermoset rubbers and thermoplastic elastomers.
These methods are not applicable to ebonite and similar hard,…
- TR | EN
- Tel : 0 (312) 394 28 68
- WhatsApp: 0546 437 05 06