ASTM D1414
ParsRos ASTM 1414
ParsRos ASTM 1414
ParsRos ASTM 1414
ParsRos ASTM 1414
ParsRos ASTM 1414

ASTM D1414 – Rubber O-Rings

ASTM D1414 – This test method describes the procedures for determining the physical properties of O-rings and changes in these properties due to aging.

Rubber bands are also commonly tested under this standard to test their tensile strength and elongation characteristics.

Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz 

Açıklama

ASTM D1414 – Standard Test Methods for Rubber O-Rings

 

 ASTM D1414 – Rubber O-Ring Testing

ASTM D1414 – This test method describes the procedures for determining the physical properties of O-rings and changes in these properties due to aging.

Rubber bands are also commonly tested under this standard to test their tensile strength and elongation characteristics.


Significance and Use

This test method provides acceptable procedures for quality control purposes and for the determination of engineering characteristics.


O-ring Roller Sizes

The fixture can use interchangeable rollers at different sizes. The standard sizes that PARSROS carries are 3.18, 4.5, 4.75, 6.35, 12.7, 15, 18.3, 22.3, and 25mm.


Referenced Documents

ASTM Standards

ASTM D297 Test Methods for Rubber ProductsChemical Analysis

ASTM  D395 Test Methods for Rubber Property–Compression Set

ASTM  D412 Test Methods for Vulcanized Rubber and Thermoplastic ElastomersTension

ASTM  D471 Test Method for Rubber Property–Effect of Liquids

ASTM  D573 Test Method for Rubber–Deterioration in an Air Oven

ASTM  D865 Test Method for Rubber–Deterioration by Heating in Air (Test Tube Enclosure)

ASTM  D1329 Test Method for Evaluating Rubber Property–Retraction at Lower Temperatures (TR Test)

ASTM  D1415 Test Method for Rubber Property–International Hardness

ASTM  D2240 Test Method for Rubber Property–Durometer Hardness

ASTM  D3767 Practice for Rubber–Measurement of Dimensions

ASTM  D4483 Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries

ASTM  E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

Aerospace Standard

AS568A Oring Sizes Standardization Documents Order Desk, Bldg. 4 Section D, 700 Robbins Ave., Philadelphia, PA 19111-5094, Attn: NPODS.

***PARSROS  offers several types of grips and fixtures which will enable you to perform a variety of tests  that are

accurate and repeatable.

Teknik Detaylar İçin Lütfen Bizimle İletişime Geçiniz 

Please contact with our engineers so that we can find and offer  Best Universal Tensile Test Machines , Grips , Jaws and Other Accessories for your operations