Standartlar | Page 36 of 46 | ParsRos Malzeme Test Cihazları

ISO 10477 – Polymer Based Crown and Veneering Materials

0 out of 5

ISO 10477 classifies polymer-based crown and veneering materials used in dentistry and specifies their requirements.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO 1099 Test Fikstürü

0 out of 5

This ISO standard specifies the conditions for carrying out axial, constant-amplitude, force-controlled fatigue tests at ambient temperature on metallic specimens, without

deliberately introduced stress concentrations.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO 11040-4 Fixtures for Testing Pre-filled Glass Syringes

0 out of 5

This ISO standard applies to Tubing-glass barrels (single-chamber design) for injection preparations, and sterilized subassembled syringes ready for filling.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO 11608-3 Needle Based Injection System Testing

0 out of 5

ISO 11608-3-specifies the functional and design considerations for containers to be used with needle-based injection systems (NIS) that fulfil the specifications

of ISO 11608-1.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO 11644 – Test for Adhesion of Finish

0 out of 5

ISO 11644 specifies a method for measuring the adhesion of the finish to leather or the adhesion between two adjacent layers of the finish.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO 11782 – A Metal Corrosion Fatigue Testing

0 out of 5

This ISO Standard provides instruction on corrosion fatigue testing of metals and alloys in aqueous or gaseous environments and is concerned with cycles to failure testing.
Bilgi Almak İçin Lütfen Bizimle <a…</a…
ISO 12106 – Metallic Materials Axial-Strain-Control Fatigue Testing

0 out of 5

ISO 12106 specifies a method of testing uniaxially loaded specimens under strain control at constant amplitude, uniform temperature and a strain ratio of

R = -1. Low cycle fatigue tests.
Bilgi Almak…
ISO 12108 Test Fikstürü

0 out of 5

This ISO Standard describes tests for determining the fatigue crack growth rate from the fatigue crack growth threshold stress-intensity factor range to the onset of rapid,

unstable fracture.
Bilgi Almak İçin Lütfen…
ISO 12111 – Strain Controlled Thermomechanical Fatigue Testing Method of Metals

0 out of 5

ISO 12111 is applicable to the TMF testing of uniaxially loaded metallic specimens under strain control.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO 12135 Test Fikstürü

0 out of 5

This ISO standard specifies methods for determining fracture toughness in terms of K, ?, J and R-curves for homogeneous metallic materials subjected to quasistatic loading
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO 12192 – Ring Crush Method

0 out of 5

ISO 12192 specifies a method for the determination of the edgewise compressive strength (ring crush resistance) of paper and paperboard, especially board used in the

manufacture of fibreboard shipping containers.
Bilgi Almak…
ISO 12236 – Static Puncture Test (CBR Test)

0 out of 5

ISO 12236 specifies a method for the determination of the puncture resistance by measuring the force required to push a flat-ended plunger through geosynthetics.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz