• ASTM-F3125

    ASTM F3125 – High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
    0 out of 5

    ASTM F3125 – This specification covers chemical, physical and mechanical requirements for quenched and tempered bolts manufactured from steel and
    alloy steel, in inch and metric dimensions, in two strength grades, two…

  • ASTM F3212 Test Fikstürü

    ASTM F3212 Test Fikstürü
    0 out of 5

    ASTM F3212 covers the qualitative measurement of Huber-type needles’ potential to remove septum material during implantable port access
    Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz 

  • ASTM F38 Test Fikstürü

    ASTM F38 Test Fikstürü
    0 out of 5

    ASTM F38 provides a means of measuring the amount of creep relaxation of a gasket material at a predetermined time after a compressive stress has been applied.
    Bilgi Almak İçin Lütfen…

  • ASTM F382 Test Fikstürü

    ASTM F382 Test Fikstürü
    0 out of 5

    ASTM F382 and test method is intended to provide a comprehensive reference for metallic bone plates used in the surgical internal fixation of the skeletal system.
    Bilgi Almak İçin Lütfen Bizimle <a…</a…

  • ASTM F394 Test Fikstürü

    ASTM F394 Test Fikstürü
    0 out of 5

    ASTM F394 covers the determination of the biaxial flexure strength (modulus of rupture) of thin ceramic substrates.
    Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz 

  • ASTM F543 Test Fikstürü

    ASTM F543 Test Fikstürü
    0 out of 5

    ASTM F543 provides requirements for materials, finish and marking, care and handling, and the acceptable dimensions and tolerances for metallic bone screws

    that are implanted into bone.
    Bilgi Almak İçin Lütfen Bizimle <a…</a…

  • ASTM F564 Test Fikstürü

    ASTM F564 Test Fikstürü
    0 out of 5

    ASTM F564 covers characterization of the design and mechanical function of metallic staples used in the internal fixation of the  musculoskeletal system.
    Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz 

  • ASTM F606 Test Fikstürü

    ASTM F606 Test Fikstürü
    0 out of 5

    ASTM F606 test methods cover establishment of procedures for conducting tests to determine the mechanical properties of externally and internally threaded fasteners,

    washers, direct tension indicators, and rivets.
    Bilgi Almak İçin Lütfen…

  • ASTM F732 Test Fikstürü

    ASTM F732 Test Fikstürü
    0 out of 5

    ASTM F732 describes a laboratory method for evaluating the wear properties of combinations of materials that are being considered for use as bearing surfaces

    of human total joint prostheses.
    Bilgi Almak İçin…

  • ASTM F88 - Standard Test Method for Seal Strength of Flexible Barrier MaterialsASTM F88 Standard Test Method for Seal Strength of Flexible Barrier Materials 2

    ASTM F88 – Standard Test Method for Seal Strength of Flexible Barrier Materials
    0 out of 5

    ASTM F88 – This test method covers the measurement of the strength of seals in flexible barrier materials. The test may be conducted on seals between a flexible
    material and a…

  • ASTM F904 Test Fikstürü 01ASTM F904 Test Fikstürü 02

    ASTM F904 Test Fikstürü
    0 out of 5

    ASTM F904 describes techniques for separating plies of laminates made from flexible materials such as cellulose, paper, plastic film, and foil to enable

    the measurement of the bond strength or ply…

  • AWS D8.9M Test Fikstürü

    AWS D8.9M Test Fikstürü
    0 out of 5

    AWS D8.9M – This document contains several standardized test methods designed to evaluate the resistance spot welding behavior of coated and uncoated sheet steels

    in a laboratory environment.
    Bilgi Almak İçin Lütfen…