-
ASTM D6241 –Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
ASTM D6241 test method is a test used to determine the puncture resistance of geotextiles and similar products.
The method is very similar to ASTM D4833, where a test specimen is secured into a…
-
ASTM D6252 – Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle
Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle
ASTM D6252 – This test method covers the measurement of the peel adhesion of pressure-sensitive label stocks.
This test method gives a measure… -
ASTM D6272 – Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272 – This test method covers the determination of flexural properties of unreinforced and reinforced plastics, including high-modulus composites and electrical
insulating materials in the form of rectangular bars molded…
-
ASTM D6287 Test Fikstürü
ASTM D6287 covers equipment and techniques for cutting film and sheeting specimens for testing.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz -
ASTM D6364 Test Fikstürü
ASTM D6364 covers the procedures for evaluation of the deformations of a geosynthetic or combination of geosynthetics (that is, geocomposite
(excluding geotextiles, geomembranes, and geosynthetic clay liners)) under short-term compressive loading.
Bilgi… -
ASTM D638 – Tensile Properties of Plastics
ASTM D638 – This test method covers the determination of the tensile properties of unreinforced and reinforced plastics in the form of standard dumbbell-shaped test
specimens when tested under defined conditions…
-
ASTM D6415 – Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D6415- Testing Fixture
ASTM D6415 Tesing fixture is useful to indicate the curved beam strength of a continuous fiber – reinforced composite material.
For the test run it is necessary to use…
-
ASTM D6484 – Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
ASTM D6484 – This test method determines the open-hole compressive strength of multidirectional polymer matrix composite laminates reinforced
by high-modulus fibers.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz -
ASTM D6484 Test Fikstürü
ASTM D6484 determines the open-hole compressive strength of multidirectional polymer matrix composite laminates reinforced by high-modulus fibers.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz -
ASTM D6496 Test Fikstürü
ASTM D6496 covers the laboratory determination of the average bonding strength between the top and bottom layers of a sample of a geosynthetic clay liner (GCL).
Bilgi Almak İçin Lütfen Bizimle -
ASTM D6636 – Ply Adhesion Strength of Reinforced Geomembranes
ASTM D6636 – This test method covers the measurement of the adhesion strength (180° peel) between plies of reinforced geomembranes such as internally
reinforced geomembranes and coated fabrics.
Bilgi Almak İçin Lütfen Bizimle -
ASTM D6641 – Compressive Properties of Polymer Matrix Composite Materials
ASTM D6641 – Combined loading compression test fixture
ASTM D6641 – This test method determines the compressive strength and stiffness properties of polymer matrix composite materials using a combined loading
compression (CLC) (1)…