-
ASTM A1034 – Testing Mechanical Splices for Steel Reinforcing Bars
ASTM A1034 – This test method covers the testing of mechanical splices for reinforcing bars.
The test methods herein described are applicable to any type of mechanical splice manufactured to join steel…
-
ASTM A125 – Steel Springs, Helical, Heat-Treated
ASTM A125 – This specification covers hot-coiled, heat-treated helical compression springs with tapered, closed, squared and ground ends made of
hot-wrought round steel bars 3/8 in. (9.5 mm) and larger in diameter.Bilgi Almak İçin…
-
ASTM A307 – Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60000 PSI Tensile Strength
ASTM A307 – This specification covers the chemical and mechanical requirements for three grades (Grades A, B, and C) of carbon steel bolts and studs in
specified sizes.
Bilgi Almak İçin Lütfen Bizimle
-
ASTM A370 – Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A370- These test methods 2 cover procedures and definitions for the mechanical testing of steels, stainless steels, and related alloys.
The various mechanical tests herein described are used to determine properties…
-
ASTM A48 – Standard Specification for Gray Iron Castings
ASTM A48 – This specification covers gray iron castings intended for general engineering use where tensile strength is a major consideration.
Castings are classified on the basis of the tensile strength of… -
ASTM C1609-Flexural Performance of Fiber-Reinforced Concrete
ASTM C1609 – This test method evaluates the flexural performance of fiber-reinforced concrete using parameters derived from the load-deflection curve obtained
by testing a simply supported beam under third-point loading using a…
-
ASTM C273 – Shear Properties of Sandwich Core Materials
ASTM C273 – This test method covers the determination of shear properties of sandwich construction core materials associated with shear distortion of
planes parallel to the facings.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM C297 – Flatwise Tensile Strength of Sandwich Constructions
ASTM C297 – This test method determines the flatwise tensile strength of the core, the core-to-facing bond, or the facing of an assembled sandwich panel.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM C307 – Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
ASTM C307 –This test method covers the determination of tensile strength of cured chemical-resistant materials in the form of molded briquets.
These materials include mortars, brick and tile grouts, machinery grouts,…
-
ASTM C393 – Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM C393 specifies a bend testing procedure for sandwich constructions of composite materials in order to analyze the shear properties of the core.
This batch of tests is used as a shear test…
-
ASTM C393 – Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM C393 – Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM C393– This test method covers determination of the properties of flat sandwich constructions subjected to flatwise flexure in… -
ASTM C394 – Shear Fatigue of Sandwich Core Materials
ASTM C394 – Shear Fatigue – Sandwich Core Materials
ASTM C394 – This test method determines the effect of repeated shear forces on core material used in sandwich panels.Bilgi Almak İçin Lütfen…
- TR | EN
- Tel : 0 (312) 394 28 68
- WhatsApp: 0546 437 05 06