-
ASTM C1135 – Tensile Adhesion Properties of Structural Sealants
ASTM C1135 – This test method covers a laboratory procedure for quantitatively measuring the tensile adhesion properties of structural sealants, hereinafter
referred to as the “sealant”.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM C1230 – Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads
ASTM C1230 – Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads
ASTM C1230 – This test method covers determination of the tensile load capacity of glass-fiber reinforced concrete (GFRC) bonding…
-
ASTM C1399 – Average Residual-Strength of Fiber-Reinforced Concrete
ASTM C1399 – Average Residual-Strength of Fiber-Reinforced Concrete
ASTM C1399 – This test method covers the determination of residual strength of a fiber–reinforced concrete test beam.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM C307 – Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
ASTM C307 –This test method covers the determination of tensile strength of cured chemical-resistant materials in the form of molded briquets.
These materials include mortars, brick and tile grouts, machinery grouts,…
-
ASTM D2105 – Longitudinal Tensile Properties of “Fiberglass” Pipe and Tube
Fiberglass Tensile Test Equipment
ASTM D2105 – This test method covers the determination of the comparative longitudinal tensile properties of fiberglass pipe when tested under defined
conditions of pretreatment, temperature, and testing… -
ASTM D2344 – Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
Short Beam Shear Testing
ASTM D2344 – This test method determines the short-beam strength of high-modulus fiber-reinforced composite materials.
The specimen is a short beam machined from a curved or a… -
ASTM D4541 – Pull-Off Strength of Coatings Using Portable Adhesion Testers
Tensile adhesion strength of thermal spray coatings
ASTM D4541 -This test method covers a procedure for evaluating the pull-off strength (commonly referred to as adhesion) of a coating system from metal substrates.
Pull-off… -
ASTM D5450 –Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D5450 – This test method determines the transverse tensile properties of wound polymer matrix composites reinforced by high-modulus continuous fibers.
It describes… -
ASTM D5528 – Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D5528 Composite Fracture Toughness Testing
ASTM D5528 – This test method describes the determination of the opening Mode I interlaminar fracture toughness, GIc, of continuous fiber-reinforced composite
materials using… -
ASTM D6641 – Compressive Properties of Polymer Matrix Composite Materials
ASTM D6641 – Combined loading compression test fixture
ASTM D6641 – This test method determines the compressive strength and stiffness properties of polymer matrix composite materials using a combined loading
compression (CLC) (1)… -
ASTM D7137 – Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
ASTM D7137 – This test method covers compression residual strength properties of multidirectional polymer matrix composite laminated plates, which have
been subjected toquasi-static… -
ASTM D7291 – Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
ASTM D7291–Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
ASTM D7291– This test method determines the through-thickness “flatwise” tension strength and elastic modulus of fiber…
- TR | EN
- Tel : 0 (312) 394 28 68
- WhatsApp: 0546 437 05 06