-
ASTM A1064 – Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
ASTM A1064 – This specification covers carbon-steel wire and welded wire reinforcement produced from hot-rolled rod to be used for the reinforcement of concrete.
The steel wire is cold-worked, drawn or rolled,…
-
ASTM C1550 – Flexural Toughness of Fiber Reinforced Concrete
Flexural Toughness Testing of Fiber Reinforced Concrete
ASTM C1550 – This test method covers the determination of flexural toughness of fiber-reinforced concrete expressed as energy absorption in the
post-crack range using a… -
ASTM C67 Test Fikstürü
ASTM C67 covers procedures for the sampling and testing of brick and structural clay tile.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM C947 – Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete
ASTM C947 – This test method covers determination of the flexural ultimate strength in bending and the yield strength of glass-fiber reinforced concrete sections
by the use of a simple beamof 1.0…
-
ASTM D1062 – Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM D1062 – This test method covers the determination of the comparative cleavage strength properties of metal-to-metal adhesive bonds.
The testing machine shall be capable of maintaining the rate of loading and…
-
ASTM D2105 – Longitudinal Tensile Properties of “Fiberglass” Pipe and Tube
Fiberglass Tensile Test Equipment
ASTM D2105 – This test method covers the determination of the comparative longitudinal tensile properties of fiberglass pipe when tested under defined
conditions of pretreatment, temperature, and testing… -
ASTM D2344 – Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
Short Beam Shear Testing
ASTM D2344 – This test method determines the short-beam strength of high-modulus fiber-reinforced composite materials.
The specimen is a short beam machined from a curved or a… -
ASTM D2519 – Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
Bond Strength Test Fixture
ASTM D2519 – This test method covers determination of the bond strength of an electrical insulating varnish when applied to a helical coil.
Bilgi Almak İçin Lütfen Bizimle
-
ASTM D3032 – Hookup Wire Insulation
Dynamic Cut – Through Test Fixture
This test method covers procedures for testing hookup wire.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM D413 – Rubber Property—Adhesion to Flexible Substrate
ASTM D413 – This test method covers the determination of the adhesion strength between plies of fabric bonded with rubber or the adhesion of the rubber layer in
articles made from rubber…
-
ASTM D5170 – Peel Strength (“T” Method) of Hook and Loop Touch Fasteners
Peel Strength (“T” Method) of Hook and Loop Touch Fasteners
ASTM D5170 – This test method covers the measurement of the peel strength of hook and loop touch fasteners using a…
-
ASTM D5179 -Measuring Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method
ASTM D5179 -Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method
ASTM D5179 – This test method covers the laboratory determination of organic coating adhesion to plastic substrates by mounting…
- TR | EN
- Tel : 0 (312) 394 28 68
- WhatsApp: 0546 437 05 06