ISO | Page 9 of 12 | ParsRos Malzeme Test Cihazları

ISO 4919 – Tuft Withdrawal Force of Carpets

0 out of 5

This ISO standard specifies a method for determination of tuft withdrawal force and is applicable to all carpets with a cut or loop pile yarn structure.

Bilgi Almak İçin Lütfen Bizimle
ISO 5173 – Bend Tests on Welds in Metallic Materials

0 out of 5

ISO 5173 specifies a method for making transverse root, face and side bend tests on test specimens taken from butt welds, butt welds with cladding

Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO 5173 Test Fikstürü

0 out of 5

ISO 5173 specifies a method for making transverse root, face and side bend tests on test specimens taken from butt welds

Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO 527-2 Tensile Testing For Plastics

0 out of 5

ISO 527-2 specifies the test conditions for determining the tensile properties of moulding and extrusion plastics, based upon the general principles given in ISO 527‑1.

Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO 527-3 Tensile Properties of Films and Sheets

0 out of 5

This ISO standard is used to determine the tensile properties of plastic film or sheeting.

Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO 604 – Determination of Compressive Properties of Plastics

0 out of 5

ISO 604 specifies a method for determining the compressive properties of plastics under defined conditions.

Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO 6237 – Shear Strength By Tensile Loading of Adhesives

0 out of 5

This ISO standard specifies a method for determining the shear strength of wood-to-wood adhesive bonds, with a standard specimen loaded in tension and under

specified conditions of preparation, conditioning and testing.

Bilgi…
ISO 6238 – Shear Strength by Compressive Loading of Adhesives

0 out of 5

This ISO standard specifies a method for determining the shear strength of wood-to-wood adhesive bonds, with a standard specimen loaded in compression and

under specified conditions of preparation, conditioning and testing.

Bilgi…
ISO 6259-1 Test Fikstürü

0 out of 5

This part of ISO 6259 specifies a method of determining the tensile properties of thermoplastics pipes, including in particular the following properties

Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO 6259-3 – Thermoplastics Pipes

0 out of 5

This ISO standard specifies a method of determining the tensile properties of polyolefin (polyethylene, cross-linked polyethylene, polypropylene, and polybutene) pipes,

and the following properties

Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO 6872- Flexural Strength Testing of Dental Ceramics

0 out of 5

This ISO standard secifies the requirements and the corresponding test methods for dental ceramic materials for fixed all-ceramic and metal-ceramic restorations and prostheses.

Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ISO 6892-1 & 2 Metal Tensile Testing

0 out of 5

ISO 6892-1 & 2 Tensile tests provide information on the strength and ductility of materials under uniaxial tensile stresses.

Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz