ASTM | Page 12 of 19 | ParsRos Malzeme Test Cihazları

ASTM D5458 – Peel Cling of Stretch Wrap Film

0 out of 5

Peel Cling of Stretch Wrap Film

This test method measures cling between two layers of film, in both a stretched and unstretched condition.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ASTM D5528 – Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites

0 out of 5

ASTM D5528 Composite Fracture Toughness Testing
ASTM D5528 – This test method describes the determination of the opening Mode I interlaminar fracture toughness, GIc, of continuous fiber-reinforced composite
materials using the double cantilever…
ASTM D5748 Test Fikstürü

0 out of 5

ASTM D5748 determines the resistance of a stretch wrap film to the penetration of a probe at a standard low rate, a single test velocity.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ASTM D575 – Rubber Properties in Compression

0 out of 5

ASTM D575 – This test method cover two test procedures for determining the compression-deflection characteristics of rubber compounds other than

those usually classified as hard rubber and sponge rubber.
Bilgi Almak İçin Lütfen…
ASTM D5751 Test Fikstürü

0 out of 5

ASTM D5751 covers performance levels for adhesives to be used in laminate joints in nonstructural lumber products.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ASTM D5801 Test Fikstürü

0 out of 5

ASTM D5801 describes the procedure for measuring the toughness and tenacity of asphalt materials.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ASTM D5804 Test Fikstürü

0 out of 5

ASTM D5804 provides a quick reliable means to measure the zero-span tensile strength of a randomly oriented specimen of fibers when dry.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ASTM D5961- Bearing Response of Polymer Matrix Composite Laminates

0 out of 5

ASTM D5961 – This test method determines the bearing response of multi-directional polymer matrix composite laminates reinforced by high-modulus fibers

by either double-shear (Procedure A) or single-shear (Procedure B) tensile loading…
ASTM D6109 Test Fikstürü

0 out of 5

ASTM D6109 – These test methods are suitable for determining the flexural properties for any solid or hollow manufactured plastic lumber product of square,

rectangular, round, or other geometric cross section…
ASTM D6128 Test Fikstürü

0 out of 5

ASTM D6128 covers the apparatus and procedures for measuring the cohesive strength of bulk solids during both continuous flow and after storage at rest.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
ASTM D6195 – Standard Test Methods for Loop Tack

0 out of 5

ASTM D6195 specifies a few procedures to measure quick stick adhesive strength.

This test is different from a peel test because the tape is not given enough time or pressure to fully…
ASTM D624 – Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers

0 out of 5

ASTM D624 – Elastomer Tear Strength Test Fixture

ASTM D624 – This test method describes procedures for measuring a property of conventional vulcanized rubber and thermoplastic elastomers called tear strength.

Vulcanized rubber and…

ASTM D5458 – Peel Cling of Stretch Wrap Film

ASTM D5528 – Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites

ASTM D5748 Test Fikstürü

ASTM D575 – Rubber Properties in Compression

ASTM D5751 Test Fikstürü

ASTM D5801 Test Fikstürü

ASTM D5804 Test Fikstürü

ASTM D5961- Bearing Response of Polymer Matrix Composite Laminates

ASTM D6109 Test Fikstürü

ASTM D6128 Test Fikstürü

ASTM D6195 – Standard Test Methods for Loop Tack

ASTM D624 – Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers

SİTE İÇİ GEZİNTİ

ÇALIŞMA SAATLERİ