-
ASTM D4032 Test Fikstürü
ASTM D4032 covers the determination of the stiffness of fabrics by the circular bend procedure.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM D412 – Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D412 – This test method covers procedures used to evaluate the tensile (tension) properties of vulcanized thermoset rubbers and thermoplastic elastomers.
These methods are not applicable to ebonite and similar hard,… -
ASTM D413 – Rubber Property—Adhesion to Flexible Substrate
ASTM D413 – This test method covers the determination of the adhesion strength between plies of fabric bonded with rubber or the adhesion of the rubber layer in
articles made from rubber…
-
ASTM D4255 – Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
ASTM D4255 – A Testing Fixture
ASTM D4255 – This test method indicates the cutting properties in the plane of a high modulus fiber-reinforced composite materials by two procedures.
Bilgi Almak İçin Lütfen…
-
ASTM D429 Test Fikstürü
ASTM D429 covers procedures for testing the static adhesional strength of rubber to rigid materials (in most cases metals).
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM D4475 Test Fikstürü
ASTM D4475 covers the determination of the apparent horizontal shear strength of fiber reinforced plastic rods.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM D4501 – Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
Block-Shear Strength Test
ASTM D4501 – This test method describes a procedure and fixture used to determine shear strengths of adhesives used to bond materials with moduli higher thanthe modulus of the…
-
ASTM D4533 Test Fikstürü
ASTM D4533 is an index test used to measure the force required to continue or propagate a tear in woven or nonwoven geotextiles by the trapezoid method.
Bilgi Almak İçin Lütfen…
-
ASTM D4541 – Pull-Off Strength of Coatings Using Portable Adhesion Testers
Tensile adhesion strength of thermal spray coatings
ASTM D4541 -This test method covers a procedure for evaluating the pull-off strength (commonly referred to as adhesion) of a coating system from metal substrates.
Pull-off… -
ASTM D4595 – Tensile Properties of Geotextiles by the Wide-Width Strip Method
ASTM D4595 – This test method covers the measurement of tensile properties of geotextiles using a wide-width strip specimen tensile method.
This test method is applicable to most geotextiles that include woven…
-
ASTM D4776 Test Fikstürü
ASTM D4776 covers the measurement of adhesion of reinforcing cords that are bonded to rubber compounds.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM D4833 – Index Puncture Resistance of Geomembranes and Related Products
ASTM D4833 – This test method is used to measure the index puncture resistance of geomembranes and related products.
The use of Test Method D 4833 may be inappropriate for testing some…
- TR | EN
- Tel : 0 (312) 394 28 68
- WhatsApp: 0546 437 05 06