-
ASTM B406 – Transverse Rupture Strength of Cemented Carbides
ASTM B406 governs a test used to find the transverse rupture strength of cemented carbides. Cemented carbide is a combination of carbon and metal which is sintered together.
Bilgi Almak İçin…
-
ASTM C1161 – Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1161 specifies a procedural overview for the bend testing of ceramics.
ASTM C1161 requires a three point and a four point bend test of the ceramic specimen.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM D1876 – Peel Resistance of Adhesives (T-Peel Test)
ASTM D1876- This test method is the most common peel test because it does not require any additional equipment beyond the grips.
This test is optimized for tapes with flexible backings, or…
-
ASTM D3167 – Floating Roller Peel Resistance of Adhesives
The Floating Roller Peel Test is one of the most common procedures for testing packaging tapes since it closely simulates real world applications.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM D3330 – Peel Adhesion of Pressure-Sensitive Tape
ASTM D3330 specifies several test methods for determining the peel strength of Pressure Sensitive Adhesives (PSA).
There are 6 test methods called out in the specification.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM D3759 – Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes
ASTM D3759 is used to characterize the breaking strength, elongation, and “F” value of PSA tapes. Tapes are commonly pulled in the tensile mode during application
and final usage.
Bilgi Almak İçin…
-
ASTM D3811 – Unwind Force of Pressure-Sensitive Tapes
ASTM D3811 characterizes a test for measuring the peak force needed to unwind a roll of pressure-sensitive adhesive (PSA) tape.
The procedure is intended to simulate unwind tape either with a human…
-
ASTM D6195 – Standard Test Methods for Loop Tack
ASTM D6195 specifies a few procedures to measure quick stick adhesive strength.
This test is different from a peel test because the tape is not given enough time or pressure to fully…
-
ASTM D6862 – Standard Test Method for 90 Degree Peel Resistance of Adhesives
Peel strength testing for adhesive tapes can be performed using different test procedures.
The 90 degree peel test is one of the most common since this test generally results in the…
- TR | EN
- Tel : 0 (312) 394 28 68
- WhatsApp: 0546 437 05 06