-
ASTM A1064 – Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
ASTM A1064 – This specification covers carbon-steel wire and welded wire reinforcement produced from hot-rolled rod to be used for the reinforcement of concrete.
The steel wire is cold-worked, drawn or rolled,…
-
ASTM C1273 Test Fikstürü
ASTM C1273 covers the determination of tensile strength under uniaxial loading of monolithic advanced ceramics at ambient temperatures.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM D1623 –Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
Tensile Adhesion Properties of Rigid Cellular Plastics
ASTM D1623 – This test method covers the determination of the tensile and tensile adhesion properties of rigid cellular materials in the form of test… -
ASTM D2105 – Longitudinal Tensile Properties of “Fiberglass” Pipe and Tube
Fiberglass Tensile Test Equipment
ASTM D2105 – This test method covers the determination of the comparative longitudinal tensile properties of fiberglass pipe when tested under defined
conditions of pretreatment, temperature, and testing… -
ASTM D2344 – Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
Short Beam Shear Testing
ASTM D2344 – This test method determines the short-beam strength of high-modulus fiber-reinforced composite materials.
The specimen is a short beam machined from a curved or a… -
ASTM D3967 – Splitting Tensile Strength of Intact Rock Core Specimens
ASTM D3967 – This test method covers testing apparatus, specimen preparation, and testing procedures for determining the splitting tensile strength of rock by
diametral line compression of disk shape specimens.Bilgi Almak İçin…
-
ASTM D4541 – Pull-Off Strength of Coatings Using Portable Adhesion Testers
Tensile adhesion strength of thermal spray coatings
ASTM D4541 -This test method covers a procedure for evaluating the pull-off strength (commonly referred to as adhesion) of a coating system from metal substrates.
Pull-off… -
ASTM D5179 -Measuring Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method
ASTM D5179 -Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method
ASTM D5179 – This test method covers the laboratory determination of organic coating adhesion to plastic substrates by mounting… -
ASTM D5450 –Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D5450 – This test method determines the transverse tensile properties of wound polymer matrix composites reinforced by high-modulus continuous fibers.
It describes… -
ASTM D5458 – Peel Cling of Stretch Wrap Film
Peel Cling of Stretch Wrap Film
This test method measures cling between two layers of film, in both a stretched and unstretched condition.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM D5528 – Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D5528 Composite Fracture Toughness Testing
ASTM D5528 – This test method describes the determination of the opening Mode I interlaminar fracture toughness, GIc, of continuous fiber-reinforced composite
materials using… -
ASTM D6252 – Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle
Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle
ASTM D6252 – This test method covers the measurement of the peel adhesion of pressure-sensitive label stocks.
This test method gives a measure…
- TR | EN
- Tel : 0 (312) 394 28 68
- WhatsApp: 0546 437 05 06