-
Elektromekanik Üniversal Çekme – Basma -Eğilme Test Cihazı , 50 kN
STANDARTLAR : EN ISO 6892-1, EN ISO 15630-1 and 2, EN ISO 7500-1 , ASTM E8M, ASTM E21, ASTM A 370, ASTM F519, ASTM B557, BS 18/1, BS 18/2, BS240,…
-
ASTM A262 – Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASTM A262 covers a test for visually inspecting intergranular attack on stainless steel samples which have been immersed in an acid bath.
The sample is prepared, and then submergned in various types…
-
ASTM A931 – Standard Test Method for Tension Testing of Wire Ropes and Strand
ASTM A931 – This test method covers the tension testing of wire ropes and strand at room temperature, specifically to determine the measured breaking force,
yield strength, elongation, and modulus of elasticity….
-
ASTM C1399 – Average Residual-Strength of Fiber-Reinforced Concrete
ASTM C1399 – Average Residual-Strength of Fiber-Reinforced Concrete
ASTM C1399 – This test method covers the determination of residual strength of a fiber–reinforced concrete test beam.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM D1062 – Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM D1062 – This test method covers the determination of the comparative cleavage strength properties of metal-to-metal adhesive bonds.
The testing machine shall be capable of maintaining the rate of loading and…
-
ASTM D1623 –Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
Tensile Adhesion Properties of Rigid Cellular Plastics
ASTM D1623 – This test method covers the determination of the tensile and tensile adhesion properties of rigid cellular materials in the form of test… -
ASTM D2095 –Tensile Strength of Adhesives by Means of Bar and Rod Specimens
Tensile Adhesives Testing Equipment
ASTM D2095 – This test method covers the determination of the relative tensile strength of adhesives by the use of bar- and rod-shaped butt-joined specimens
under defined conditions of… -
ASTM D3967 – Splitting Tensile Strength of Intact Rock Core Specimens
ASTM D3967 – This test method covers testing apparatus, specimen preparation, and testing procedures for determining the splitting tensile strength of rock by
diametral line compression of disk shape specimens.Bilgi Almak İçin…
-
ASTM D412 – Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D412 – This test method covers procedures used to evaluate the tensile (tension) properties of vulcanized thermoset rubbers and thermoplastic elastomers.
These methods are not applicable to ebonite and similar hard,… -
ASTM D4541 – Pull-Off Strength of Coatings Using Portable Adhesion Testers
Tensile adhesion strength of thermal spray coatings
ASTM D4541 -This test method covers a procedure for evaluating the pull-off strength (commonly referred to as adhesion) of a coating system from metal substrates.
Pull-off… -
ASTM D5179 -Measuring Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method
ASTM D5179 -Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method
ASTM D5179 – This test method covers the laboratory determination of organic coating adhesion to plastic substrates by mounting… -
ASTM D5458 – Peel Cling of Stretch Wrap Film
Peel Cling of Stretch Wrap Film
This test method measures cling between two layers of film, in both a stretched and unstretched condition.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
- TR | EN
- Tel : 0 (312) 394 28 68
- WhatsApp: 0546 437 05 06