• Proctor Penetrometer

    0 out of 5

    It is used for establishing the moisture-penetration resistance relation of finegrained soils.
    Please Contact With Us For More Information

  • Proportional Calipers

    0 out of 5

    STANDARDS : ASTM D4791

    Proportional Caliper is used for the rapid and easy determination of percentage of flat particles, elongated particles, or both in coarse aggregate fractions

    of 9.5mm (3/8 in) or larger.
    Please <a…</a…

  • Proving Ring Penetrometer

    0 out of 5

    STANDARDS : TS 1900-1;ASTM D2937

    Proving Ring Penetrometer is used to determine the bearing capacity of subgrades, or to measure soil compaction.

    Light and easy to handle in the field.
    Please Contact With Us…

  • Pumice-Concrete Block Compression Machines

    0 out of 5

    STANDARDS : TS EN 772-1

    Automatic range of 1200 kN and 3000 kN capacity Pumice-Concrete Block Compression Machines has been designed for reliable and consistent testing of a Pumice Concrete,

    Brick and Concrete…

  • Quality of Water Test Kit

    0 out of 5

    Water Test Kit  is a chemical test kit that measures six parameters common in water quality testing: alkalinity, chloride, hardness, iron, pH, and sulfite.
    Please Contact With Us For More…

  • Reference Colour Glasses

    0 out of 5

    STANDARDS : EN 1744-1; ASTM C40

    The apparatus  consists of 5 organic glass scales mounted in a plastic holder, which is used for the comparison of the colour results from the relevant…

  • Reflux Extractor Test Set

    0 out of 5

    STANDARDS : ASTM D2172; AASHTO T164 B

    Reflux Extractor is used for the quantitative determination of bitumen in hot-mixed paving mixtures and pavement samples.
    Please Contact With Us For More Information

  • Relative Density Of Cohesionless Soil

    0 out of 5

    Relative density or density index is the ratio of the difference between the void ratios of a cohesionless soil in its loosest state and existing natural state to the

    difference between…

  • Riffle Boxes

    0 out of 5

    STANDARDS : EN 932-2; ASTM C702; BS 812:1, 1377:1, 1924:1

    They are used for dividing aggregates into 2 equal homogenous quantity for testing.
    Please Contact With Us For More Information

  • Rotary Bending Fatigue Testing Machine

    0 out of 5

    ParsRos Rotary Bending Fatigue Testing Machines  are suitable to test the fatigue strength of metals or other materials. These machines test the bending fatigue

    limit of metals under the action of…

  • Salt Spray Test Cabinet

    0 out of 5

    Salt Spray Test Cabinet  has a standardized test method to check corrosion resistence of coated samples.

    Salt spray test is an accelerated corrosion test that produces a corrosive attack to the coated…

  • Sand Absorption ( Abraham Cone ) Set

    0 out of 5

    STANDARDS : EN 1097-6; BS 812-2; UNI 8520-13-16; ASTM C128; NLT 154; DIN 12039

    Test Set is used for  determining the specific gravity and water absorption of fine aggregates smaller than 10 mm.
    Please <a…</a…