• Kum Banyosu

    Sand Bath
    0 out of 5

    Device is a common piece of laboratory equipment made from a container filled with heated sand.

    It is used to provide even heating for another container, most often during a chemical…

  • Sand Cone Test SetSand Cone Test Set

    Sand Cone Test Sets
    0 out of 5

    STANDARDS : ASTM D1556; AASHTO T181, T191

    Sand Cone Sets are used for the determination of the degree of compaction on site.
    Please Contact With Us For More Information

  • Sand Content Test Kit

    Sand Content Test Kit
    0 out of 5

    Sand content is the volume percentage of particles larger than 74 microns. Periodic determination of the sand content in a drilling fluid is desirable.
    Please Contact With Us For More…

  • Sand Equivalent Shaker

    Sand Equivalent Shaker
    0 out of 5

    STANDARDS : EN 933-8 / ASTM D2419 / AASHTO T176 / BS 1924 / UNI 8520-15 / UNE 83131

    It  is used for the uniform shaking of Sand Equivalent Measuring Cylinders, at…

  • ParsRos Sand Equivalent Test Sets

    Sand Equivalent Test Sets
    0 out of 5

    STANDARDS : EN 933–8; ASTM D2419; AASHTO T176; UNI 8520–15; UNE 83131; CNR No. 27

    The Sand Equivalent Test Set is used to determine the fines of aggregates.
    Please Contact With Us For…

  • Sand Replacement Test Set

    Sand Replacement Test Sets
    0 out of 5

    STANDARDS : BS 1377:9, 1924:2

    Test Set is used for the determination of the degree of compaction on site. The Complete set consists of a pouring cylinder, calibration container and tray.
    Please Contact…

  • Saybolt Viscometer

    Saybolt Viscometer
    0 out of 5

    STANDARDS : ASTM D88-D244,AASHTO T72

    This Viscometer  is used to determine the viscosity of petroleum products at specified temperatures between 70 to 210 °F.
    Please Contact With Us For More Information

  • Bitumen Penetrometer

    Semi-Automatic Digital Bitumen Penetrometer
    0 out of 5

    STANDARDS : EN 1426; ASTM D5; AASHTO T49

    Semi-Automatic Digital Penetrometer is used to determine the penetration of bituminous samples under constant load, time and temperature.
    Please Contact With Us For More…

  • Cone Penetrometer

    Semi-Automatic Digital Cone Penetrometers
    0 out of 5

    STANDARDS : BS 1377:2; NF P94-052-1; CEN ISO/TS 17892-6, 17892-12

    Cone Penetrometer is used to determine the moisture content at which clay soils pass from a plastic to a liquid state, and used…

  • Servo Hydraulic Fatique Testing Machine

    Servo Hydraulic Fatique Testing Machine
    0 out of 5

    STANDARDS 

    ISO 12106:2017 , ISO 1099 , ISO 4965-1, ISO 4965-2, AFNOR A 03-403:1990 , BS 7270:2006 , ASTM E 606-12, ASTM C1368 , ASTM C394 , ASTM D3479 , ASTM D7774 ,

    ASTM E2207 , ASTM E2368 , ASTM E2714 , ASTM E466 , ASTM E467  , ASTM E606 , ASTM E647 , ASTM F1612 , ASTM F1717 , ASTM F1798 , ASTM F1800 , ASTM F1820 ,

    ASTM F2118 , ASTM F2193 , ASTM…

  • Servo Hydraulic Tensile Testing Machine

    Servo Hydraulic Tensile Testing Machine ,1000 kN
    0 out of 5

    STANDARDS :  ASTM E8M, ASTM E21, ASTM A 370, ASTM F519, ASTM B557, BS 18/1, BS 18/2, BS240, BS 1140,BS 1639, BS 2874, BS 3855, BS 4449,

    BS 4482, BS 4483, BS…

  • Servo Hydraulic Tensile Testing Machine

    Servo Hydraulic Tensile Testing Machine ,600 kN
    0 out of 5

    STANDARDS :  ASTM E8M, ASTM E21, ASTM A 370, ASTM F519, ASTM B557, BS 18/1, BS 18/2, BS240, BS 1140,BS 1639, BS 2874, BS 3855, BS 4449, BS 4482, BS 4483,

    BS…