- TEKNİK ÖZELLİKLER
EN 2243-2 Aerospace Series – Non-Metallic Materials – Structural Adhesives – Test method
Part 2: Peel Metal-Metal
EN 2243-2 defines the general requirements for the determination of strength of structural adhesives by testing in peel metal to metal joints, at ambient or other temperatures.
This method is not suitable for adhesives having an average peeling strength of less than 30 N per 25 mm.
Tensile testing machine
The tensile testing machine shall conform to class 1 of EN ISO 7500-1.
The failing load of the test specimen shall be within 10 % and 90 % of the upper limit of the selected loading range of the machine.
Fixing Peeling jig
*** Before conducting EN 2243-2 , it is important to read the entire specification. Standards can be obtained from appropriate standard authorities
***PARSROS offers several types of grips and fixtures which will enable you to perform a variety of tests
that are accurate and repeatable.