-
ASTM C557 – Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM C557 covers the minimum performance standards for and properties of adhesives intended to bond the back surface paper of gypsum wallboard to wood
framing members.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM C565 Test Fikstürü
This test standard covers the apparatus, specimen, and procedures for the tension testing of carbon and graphite mechanical materials with a grain size smaller
than 0.79 mm.
Bilgi Almak İçin Lütfen Bizimle
-
ASTM C633 – Adhesion or Cohesion Strength of Thermal Spray Coatings
ASTM C633 – This test method covers the determination of the degree of adhesion (bonding strength) of a coating to a substrate or the cohesion strength of the coating
in a tension… -
ASTM C67 Test Fikstürü
ASTM C67 covers procedures for the sampling and testing of brick and structural clay tile.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM C719 Test Fikstürü
ASTM C719 is an accelerated laboratory procedure for evaluating the performance of a building sealant in a test configuration that is subjected to water immersion,
cyclic movement, and temperature change
Bilgi Almak…
-
ASTM C736 Test Fikstürü
ASTM C736 covers a laboratory procedure for the determination of the extension-recovery and adhesion of latex sealants.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM C749 Test Fikstürü
ASTM C749 the testing of carbon and graphite in tension to obtain the tensile stress-strain behavior, to failure
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM C78 Test Fikstürü
ASTM C78 covers the determination of the flexural strength of concrete by the use of a simple beam with third-point loading
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM C880 Test Fikstürü
ASTM C880 covers the procedure for determining the flexural strength of stone by use of a simple beam using quarter-point loading.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM C947 – Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete
ASTM C947 – This test method covers determination of the flexural ultimate strength in bending and the yield strength of glass-fiber reinforced concrete sections
by the use of a simple beamof 1.0…
-
ASTM C952 Test Fikstürü
ASTM C952 provides two procedures for measuring bond strength of mortar to masonry units
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
-
ASTM C961 – Standard Test Method for Lap Shear Strength of Sealants
ASTM C961 – This test method measures the cohesive strength of sealants when subjected to shear stresses, and also provides information regarding the adhesive
bond to the substrates being tested.
Bilgi Almak…
- TR | EN
- Tel : 0 (312) 394 28 68
- WhatsApp: 0546 437 05 06