Elektromekanik Test Cihazları | ParsRos Malzeme Test Cihazları

ASTM C1609-Flexural Performance of Fiber-Reinforced Concrete

0 out of 5

ASTM C1609 – This test method evaluates the flexural performance of fiber-reinforced concrete using parameters derived from the load-deflection curve obtained

by testing a simply supported beam under third-point loading using a…
ASTM D4501 – Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method

0 out of 5

Block-Shear Strength Test
ASTM D4501 – This test method describes a procedure and fixture used to determine shear strengths of adhesives used to bond materials with moduli higher than

the modulus of the…
ASTM D4541 – Pull-Off Strength of Coatings Using Portable Adhesion Testers

0 out of 5

Tensile adhesion strength of thermal spray coatings
ASTM D4541 -This test method covers a procedure for evaluating the pull-off strength (commonly referred to as adhesion) of a coating system from metal substrates.
Pull-off…
ASTM E290 – Standard Test Methods for Bend Testing of Material for Ductility

0 out of 5

ASTM E290 – This test method covers bend testing for ductility of materials.
Included in the procedures are four conditions of constraint on the bent portion of the specimen; a guided-bend test…
Elektromekanik Üniversal Çekme Test Cihazı,10 kN

0 out of 5

ParsRos Elektromekanik Üniversal Çekme Test Cihazı;

Servo sisteme sahip; Yüksek hassasiyet ve verimlilikte çalışan, Çevre dostu, Hidrolik yağı gerektirmeyen Bakım masrafları düşük sistemlerdir.

Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz

ASTM C1609-Flexural Performance of Fiber-Reinforced Concrete

ASTM D4501 – Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method

ASTM D4541 – Pull-Off Strength of Coatings Using Portable Adhesion Testers

ASTM E290 – Standard Test Methods for Bend Testing of Material for Ductility

Elektromekanik Üniversal Çekme Test Cihazı,10 kN

Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz

SİTE İÇİ GEZİNTİ

ÇALIŞMA SAATLERİ