ISO 19927 – Interlaminar Strength and Modulus by Double Beam Shear Test
ISO 19927 specifies a procedure for determining the interlaminar strength, and modulus, by double beam shear (DBS) tests of fibre-reinforced plastic composites.
Bilgi Almak İçin Lütfen Bizimle İletişime Geçiniz
- Açıklama
- TEKNİK ÖZELLİKLER
Açıklama
ISO 19927 Fibre-Reinforced Plastic Composites
Determination of Interlaminar Strength and Modulus by Double Beam Shear est
ISO 19927 specifies a procedure for determining the interlaminar strength, and modulus, by double beam shear (DBS) tests of fibre-reinforced plastic composites.
The method is suitable for use with glass or carbon fibre-reinforced plastic composites with thermoset matrices, providing an acceptable interlaminar failure is
obtained.
This document only applies to laminate with a symmetrical and balanced lay‐up as it avoids bending/twisting or bending/extension coupling deformations.
The preferred lay-up is unidirectional, with fibres aligned along the specimen (axial) length.
The suitability of the test for specific lay-ups, matrices and fibres (e.g. natural) are assessed by trial tests to ensure the correct delamination failures are obtained.
*** Before conducting ISO 19927 , it is important to read the entire specification. Standards can be obtained from appropriate standard authorities.
***PARSROS offers several types of grips and fixtures which will enable you to perform a variety of tests
that are accurate and repeatable.
