placeholder

BS EN 310 Test Fixture

BS EN 310 specifies a method of determining the apparent modulus of elasticity in flatwise bending and bending strength of wood-based panels of nominal

thickness equal to or greater than 3 mm.

Please Contact With Us For More Information

Description

BS EN 310  Wood Based Panels — Determination of Modulus of Elasticity in Bending and of Bending Strength

 

BS EN 310 specifies a method of determining the apparent modulus of elasticity in flatwise bending and bending strength of wood-based panels of nominal

thickness equal to or greater than 3 mm.


Testing Apparatus

Two parallel, cylindrical, roller-bearing supports of length exceeding the width of the test piece and of (15 ± 0,5) mm diameter.

The distance between the supports shall be adjustable.

A cylindrical loading head, of the same length and (30 ± 0,5) mm in diameter, placed parallel to the supports and equidistant from them.

A suitable instrument capable of measuring the deflection of the test piece in the middle of the span with an accuracy of 0,1 mm.

A suitable load measurement system capableof measuring the load applied to the test piece withan accuracy of 1 % of the measured value.

*** Before conducting BS EN 310 , it is important to read the entire specification. Standards can be obtained from appropriate standard authorities.

 

***PARSROS  offers several types of grips and fixtures which will enable you to perform a variety of tests

  that are accurate and repeatable.

Reviews

There are no reviews yet.


Be the first to review “BS EN 310 Test Fixture”

Please Contact  with our engineers so that we can find and offer  Best Universal Tensile Test Machines , Grips , Jaws and Other Accessories for your operations