-
ASTM F2634 Test Fixture
ASTM F2634 is a tensile impact test method that develops enough tensile impact energy at specific rates of strain to rupture standard tensile impact specimens
of butt fused plastic pipe.
Please Contact With… -
ASTM F2878 Test Fixture
ASTM F2878 is used to determine the force required to cause a sharp-edged hypodermic needle to penetrate through protective clothing material.
Please Contact With Us For More Information -
ASTM F3125 – Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
ASTM F3125 – This specification covers chemical, physical and mechanical requirements for quenched and tempered bolts manufactured from steel and
alloy steel, in inch and metric dimensions, in two strength grades, two… -
ASTM F3212 Test Fixture
ASTM F3212 covers the qualitative measurement of Huber-type needles’ potential to remove septum material during implantable port access
Please Contact With Us For More Information -
ASTM F38 Test Fixture
ASTM F38 provides a means of measuring the amount of creep relaxation of a gasket material at a predetermined time after a compressive stress has been applied.
Please Contact With Us For… -
ASTM F382 Test Fixture
ASTM F382 and test method is intended to provide a comprehensive reference for metallic bone plates used in the surgical internal fixation of the skeletal system.
Please Contact With Us For More… -
ASTM F394 Test Fixture
ASTM F394 covers the determination of the biaxial flexure strength (modulus of rupture) of thin ceramic substrates.
Please Contact With Us For More Information -
ASTM F543 Test Fixture
ASTM F543 provides requirements for materials, finish and marking, care and handling, and the acceptable dimensions and tolerances for metallic bone screws
that are implanted into bone.
Please Contact With Us For More… -
ASTM F564 Test Fixture
ASTM F564 covers characterization of the design and mechanical function of metallic staples used in the internal fixation of the musculoskeletal system.
Please Contact With Us For More Information -
ASTM F606 Test Fixture
ASTM F606 test methods cover establishment of procedures for conducting tests to determine the mechanical properties of externally and internally threaded
fasteners, washers, direct tension indicators, and rivets.
Please Contact With Us For… -
ASTM F732 Test Fixture
ASTM F732 describes a laboratory method for evaluating the wear properties of combinations of materials that are being considered for use as bearing surfaces
of human total joint prostheses.
Please Contact With Us… -
ASTM F88 – Standard Test Method for Seal Strength of Flexible Barrier Materials
ASTM F88 – This test method covers the measurement of the strength of seals in flexible barrier materials. The test may be conducted on seals between a flexible
material and a…
- TR | EN
- Tel : +90 (312) 394 28 68
- WhatsApp: +90 (546) 437 05 06