Standards | Page 8 of 46 | Parsros Material Testing Equipments

ASTM D2061 Fig.19 Test Fixture

0 out of 5

ASTM D2061 covers the determination of the strengths for zipper and zipper parts. All methods are not suitable for use with all kinds of zipper.
Please Contact With Us For More Information
ASTM D2061 Fig.20 Test Fixture

0 out of 5

ASTM D2061 covers the determination of the strengths for zipper and zipper parts. All methods are not suitable for use with all kinds of zipper.
Please Contact With Us For More Information
ASTM D2061 Fig.3 Test Fixture

0 out of 5

ASTM D2061 covers the determination of the strengths for zipper and zipper parts. All methods are not suitable for use with all kinds of zipper.
Please Contact With Us For More Information
ASTM D2061 Fig.9 Test Fixture

0 out of 5

ASTM D2061 covers the determination of the strengths for zipper and zipper parts. All methods are not suitable for use with all kinds of zipper.
Please Contact With Us For More Information
ASTM D2062 Test Fixture

0 out of 5

ASTM D2062 – These test methods cover procedures for determining the following characteristics of zippers:
Please Contact With Us For More Information
ASTM D2095 – Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens

0 out of 5

ASTM D2095 – Tensile Adhesives Testing Equipment
ASTM D2095 – This test method covers the determination of the relative tensile strength of adhesives by the use of bar- and rod-shaped butt-joined specimens
under…
ASTM D2105 – Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” Pipe and Tube

0 out of 5

ASTM D2105 – Fiberglass Tensile Test Equipment

ASTM D2105 – This test method covers the determination of the comparative longitudinal tensile properties of fiberglass pipe when tested under defined
conditions of pretreatment,…
ASTM D2229 Test Fixture

0 out of 5

ASTM D2229 – This test method covers the determination of the force required to pull a steel cord from a block of vulcanized rubber.
Please Contact With Us For More Information
ASTM D2290 Test Fixture

0 out of 5

ASTM D2290 covers the determination of the comparative apparent tensile strength of most plastic products utilizing a split disk or ring segment test fixture
Please Contact With Us For More Information
ASTM D2344 – Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates

0 out of 5

ASTM D2344 –Short Beam Shear Testing
ASTM D2344 – This test method determines the short-beam strength of high-modulus fiber-reinforced composite materials.
The specimen is a short beam machined from a curved or a flat…
ASTM D2519 – Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test

0 out of 5

Bond Strength Test Fixture

ASTM D2519 – This test method covers determination of the bond strength of an electrical insulating varnish when applied to a helical coil.
Please Contact With Us…
ASTM D2724 Test Fixture

0 out of 5

ASTM D2724 covers procedures for characterizing the bond strength of bonded, fused, and laminated apparel fabrics before or after drycleaning and laundering.
Please Contact With Us For More Information

ASTM D2061 Fig.19 Test Fixture

ASTM D2061 Fig.20 Test Fixture

ASTM D2061 Fig.3 Test Fixture

ASTM D2061 Fig.9 Test Fixture

ASTM D2062 Test Fixture

ASTM D2095 – Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens

ASTM D2105 – Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” Pipe and Tube

ASTM D2229 Test Fixture

ASTM D2290 Test Fixture

ASTM D2344 – Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates

ASTM D2519 – Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test

ASTM D2724 Test Fixture

USEFUL LINKS

OPENING HOURS