-
ASTM D2861 – Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics (Withdrawn 2020)
ASTM D2861 – This test method covers procedures for testing flexible materials consisting of copper foil combined with either dielectric film or with treated or
impregnated fabric to form flexible composites… -
ASTM D2979 Test Fixture
ASTM D2979 covers measurement of the pressure-sensitive tack of adhesives.
Please Contact With Us For More Information -
ASTM D2990 Test Fixture
ASTM D2990 cover the determination of tensile and compressive creep and creep-rupture of plastics u
Please Contact With Us For More Information -
ASTM D3032 – Standard Test Methods for Hookup Wire Insulation
Dynamic Cut – Through Test Fixture
ASTM D3032 – This test method covers procedures for testing hookup wire.
Please Contact With Us For More Information
-
ASTM D3167- Floating Roller Peel Test Fixture
The Floating Roller Peel Test is one of the most common procedures for testing packaging tapes since it closely simulates real world applications.
ASTM D3167 is similar to the ASTM D1781 Climbing Drum Peel…
-
ASTM D3330 – Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
ASTM D3330 specifies several test methods for determining the peel strength of Pressure Sensitive Adhesives (PSA).
There are 6 test methods called out in the specification.
Please Contact With Us For More… -
ASTM D3354 – Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
ASTM D3354 – This test method yields quantitative information regarding the degree of blocking (unwanted adhesion) existing between layers of plastic film.
It is not intended to measure susceptibility to blocking.
By… -
ASTM D3410 – Standard Test Method for Compressive Properties of Polymer Matrix
ASTM D3410 | Composites | Shear Testing
ASTM D3410 is a testing standard designed to measure the compressive properties of polymer matrix composite materials reinforced by high-modulus fibers.
*** It is commonly used for composites…
-
ASTM D3433 – Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
ASTM D3433 – Fracture Cleavage Adhesives Testing Machine & Fixtures
ASTM D3433 – This test method (1, 2, 3, 4, 5)2 covers the determination of fracture strength in cleavage of adhesives when tested on standard specimens
and under specified… -
ASTM D3479 – Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
ASTM D3479 Tension-Tension Fatigue of Polymer Matrix Composite Materials
ASTM D3479 – This test method determines the fatigue behavior of polymer matrix composite materials subjected to tensile cyclic loading.
Please Contact With… -
ASTM D3759 – Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes
ASTM D3759 is used to characterize the breaking strength, elongation, and “F” value of PSA tapes. Tapes are commonly pulled in the tensile mode during application
and final usage.
Please Contact… -
ASTM D3787 Test Fixture
ASTM D3787 describes the measurement for bursting strength with a ball burst strength tester of textiles or garments that exhibit a high degree of ultimate
elongation.
Please Contact With Us For More Information
- TR | EN
- Tel : +90 (312) 394 28 68
- WhatsApp: +90 (546) 437 05 06