Standards | Page 42 of 44 | Parsros Material Testing Equipments

ISO 844 – Rigid Cellular Plastics Compression Properties

0 out of 5

ISO 844 Testing is the compressive strength of a cellular material determined by applying load to a test specimen with a square or circular cross section.

Please Contact With Us For More…
ISO 8490 – Modified Erichsen Cupping Test

0 out of 5

ISO 8490 specifies a method for determining the ability of sheets and strips having a thickness from 0,2 up to 2 mm and a width of 90 mm or more…
ISO 8493 – Drift Expanding Test

0 out of 5

ISO 8493 – In the drift-expanding test, a conical mandrel is pressed into a tube specimen via materials testing machine according to the tube’s inner diameter and

the tube is expanded.

Please
ISO 8494 – Flanging Test

0 out of 5

ISO 8494 specifies a method for determining the ability of metallic tubes of circular cross-section to undergo plastic deformation during flange formation.

Please Contact With Us For More Information
ISO 8510-1 Adhesive Peel Test

0 out of 5

ISO 8510-1 Particularly suitable for use with less flexible adherends for which a 180 ° peel test is not suitable because the adherends crack, break or delaminate.

Please Contact With Us For…
ISO 9046 – Adhesion/Cohesion Properties of Sealants at Constant Temperature

0 out of 5

This ISO standard specifies a method for the determination of the adhesion/cohesion properties of sealants with predominantly plastic behaviour which are used in joints in

building construction.

Please Contact With Us For More…
ISO 9073 Textiles Test Equipment

0 out of 5

ISO 9073-18 specifies a grab tensile test procedure for determining the breaking strength and elongation of nonwoven materials.

Please Contact With Us For More Information
ISO 9073-5 Mechanical Penetration of Nonwoven Fabrics

0 out of 5

This ISO standard specifies a method for determining the resistance to mechanical penetration of nonwoven fabrics by a ball of a given diameter.

Please Contact With Us For More Information
ISO 9073-7 Bending Length of Nonwowens Textiles

0 out of 5

ISO 9073-7 specifies a method for the determination of the bending length of nonwovens. Gives an equation for calculating the flexural rigity of the fabric from the

bending length.

Please Contact With Us…
ISO 9187-1 Injection Equipment for Medical Use

0 out of 5

ISO 9187-1 specifies materials, dimensions, capacities, performance and packaging requirements for three forms of glass ampoule (forms B, C and D) for injectable

pharmaceutical products.

Please Contact With Us For More Information
ISO 9311-2 Shear Strength of Adhesives

0 out of 5

This ISO standard specifies a method for the determination of the shear strength of joints made with adhesives for thermoplastic piping systems.

Please Contact With Us For More Information
ISO 9626 – Stainless Steel Needle Tubing for the Manufacture of Medical Devices

0 out of 5

ISO 9626 applies to rigid stainless steel needle tubing suitable for use in the manufacture of hypodermic needles and other medical devices primarily for human use.

Please Contact With Us For More…