-
ASTM D6636 – Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes
ASTM D6636 Ply Adhesion Strength of Reinforced Geomembranes
ASTM D6636 – This test method covers the measurement of the adhesion strength (180° peel) between plies of reinforced geomembranes such as internally
reinforced geomembranes…
-
ASTM D6641 – Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
Combined loading compression test fixture
ASTM D6641 – This test method determines the compressive strength and stiffness properties of polymer matrix composite materials using a combined loading
compression (CLC) (1) 2 test fixture. -
ASTM D6671 – Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
MIXED-MODE BENDING FRACTURE TOUGHNESS
ASTM D6671 – This test method covers the determination of interlaminar fracture toughness, Gc, of continuous fiber-reinforced composite materials at various Mode
I to Mode II loading ratios using the… -
ASTM D6742 Test Fixture
ASTM D6742 provides instructions for modifying open-hole tension and compression test methods to determine filled-hole tensile and compressive strengths.
Please Contact With Us For More Information -
ASTM D6775 Test Fixture
ASTM D6775 covers the determination of the breaking strength and elongation of textile webbing, tape and braided materials using a split-drum type specimen clamp.
Please Contact With Us For More Information -
ASTM D6797 Test Fixture
ASTM D6797 describes the measurement for bursting strength of woven and knitted textiles taken from rolls of fabric or fabric taken from garments.
Please Contact With Us For More Information -
ASTM D6862 – 90 Degree Peel Test Fixture
Peel strength testing for adhesive tapes can be performed using different test procedures.
ASTM D6862 – The 90 degree peel test is one of the most common since this test generally…
-
ASTM D6873 Test Fixture
ASTM D6873 provides instructions for modifying static bearing test methods to determine the fatigue behavior of composite materials subjected to cyclic bearing forces.
Please Contact With Us For More Information -
ASTM D695 – Standard Test Method for Compressive Properties of Rigid Plastics
ASTM D695 – describes a test method for rigid plastics in compression. There are a few variations in the test, depending on the size of the sample being used.
The test can be…
-
ASTM D7078 – Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM D7078 V-notched Rail Shear Fixture
ASTM D7078 – This test method covers the determination of the shear properties of high-modulus fiber-reinforced composite materials by clamping the ends of a
V-notched specimen between…
-
ASTM D7084 Test Fixture
ASTM D7084 covers the determination of bulk crush strength of a bed of formed catalyst particles 1⁄32 to 3⁄16 inch
Please Contact With Us For More Information -
ASTM D7137 – Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
ASTM D7137 – This test method covers compression residual strength properties of multidirectional polymer matrix composite laminated platesPlease Contact With Us…
- TR | EN
- Tel : +90 (312) 394 28 68
- WhatsApp: +90 (546) 437 05 06