-
ASTM D5458 – Standard Test Method for Peel Cling of Stretch Wrap Film
Peel Cling of Stretch Wrap Film
ASTM D5458 – This test method measures cling between two layers of film, in both a stretched and unstretched condition.
Please Contact With Us For More…
-
ASTM D5528 – Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
Composite Fracture Toughness Testing
ASTM D5528 – This test method describes the determination of the opening Mode I interlaminar fracture toughness, GIc, of continuous fiber-reinforced composite
materials using the double… -
ASTM D571 Test Fixture
ASTM D751 covers, but are not limited to, rubber-coated fabrics, that is, tarpaulins, rainwear, and similar products.
Please Contact With Us For More Information
-
ASTM D5748 Test Fixture
ASTM D5748 determines the resistance of a stretch wrap film to the penetration of a probe at a standard low rate, a single test velocity.
Please Contact With Us For More Information
-
ASTM D575 – Standard Test Methods for Rubber Properties in Compression
ASTM D575 – This test method cover two test procedures for determining the compression-deflection characteristics of rubber compounds other than
those usually classified as hard rubber and sponge rubber.
Please Contact With…
-
ASTM D5751 Test Fixture
ASTM D5751 covers performance levels for adhesives to be used in laminate joints in nonstructural lumber products.
Please Contact With Us For More Information
-
ASTM D5801 Test Fixture
ASTM D5801 describes the procedure for measuring the toughness and tenacity of asphalt materials.
Please Contact With Us For More Information
-
ASTM D5804 Test Fixture
ASTM D5804 provides a quick reliable means to measure the zero-span tensile strength of a randomly oriented specimen of fibers when dry.
Please Contact With Us For More Information
-
ASTM D5961- Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
ASTM D5961 – This test method determines the bearing response of multi-directional polymer matrix composite laminates reinforced by high-modulus fibers
by either double-shear (Procedure A) or single-shear (Procedure B) tensile loading…
-
ASTM D6109 Test Fixture
ASTM D6109 – These test methods are suitable for determining the flexural properties for any solid or hollow manufactured plastic lumber product of square,
rectangular, round, or other geometric cross section…
-
ASTM D6128 Test Fixture
ASTM D6128 covers the apparatus and procedures for measuring the cohesive strength of bulk solids during both continuous flow and after storage at rest.
Please Contact With Us For More Information
-
ASTM D6195 – Standard Test Methods for Loop Tack
ASTM D6195 specifies a few procedures to measure quick stick adhesive strength.
This test is different from a peel test because the tape is not given enough time or pressure to fully…
- TR | EN
- Tel : +90 (312) 394 28 68
- WhatsApp: +90 (546) 437 05 06