Electromechanical Tensile Test Machine | Parsros Material Testing Equipments

ASTM C633 – Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings

0 out of 5

ASTM C633 – This test method covers the determination of the degree of adhesion (bonding strength) of a coating to a substrate or the cohesion strength of the
coating in a tension…
ASTM D143 – Standard Test Methods for Small Clear Specimens of Timber

0 out of 5

ASTM D143 – This test method covers the determination of various strength and related properties of wood by testing small clear specimens.
This test method represents procedures for evaluating the different…
ASTM D2105 – Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” Pipe and Tube

0 out of 5

ASTM D2105 – Fiberglass Tensile Test Equipment

ASTM D2105 – This test method covers the determination of the comparative longitudinal tensile properties of fiberglass pipe when tested under defined
conditions of pretreatment,…
ASTM D3032 – Standard Test Methods for Hookup Wire Insulation

0 out of 5

Dynamic Cut – Through Test Fixture

ASTM D3032 – This test method covers procedures for testing hookup wire.

Please Contact With Us For More Information
ASTM D413 – Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate

0 out of 5

ASTM D413 – This test method covers the determination of the adhesion strength between plies of fabric bonded with rubber or the adhesion of the
rubber layer in articles made from rubber…
ASTM D4501 – Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method

0 out of 5

ASTM D4501 – Block-Shear Strength Test
ASTM D4501 – This test method describes a procedure and fixture used to determine shear strengths of adhesives used to bond materials with moduli higher than

the…
ASTM D5528 – Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites

0 out of 5

Composite Fracture Toughness Testing

ASTM D5528 – This test method describes the determination of the opening Mode I interlaminar fracture toughness, GIc, of continuous fiber-reinforced composite
materials using the double…
ASTM D6252 – Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle

0 out of 5

ASTM D6252 – Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle

ASTM D6252 – This test method covers the measurement of the peel adhesion of pressure-sensitive label stocks.

This test method…
ASTM D7332 – Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite

0 out of 5

Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
ASTM D7332 – This test method determines the fastener pull-through resistance of multidirectional polymer matrix composites reinforced by high-modulus fibers.

Please Contact With…
ASTM E190 – Standard Test Method for Guided Bend Test for Ductility of Welds

0 out of 5

Guided Bend Test for Ductility of Welds

ASTM E190 – This test method covers a guided bend test for the determination of soundness and ductility of welds in ferrous and nonferrous products.

Please…
ASTM E399 – Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials

0 out of 5

ASTM E399 – Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials

ASTM E399 -This test method covers the determination of fracture toughness (KIc and optionally KIsi) of metallic materials under predominantly linear-elastic,

Please Contact With…
ASTM F1554 – Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

0 out of 5

ASTM F1554 – Tensile Test for Steel Anchor Bolts
ASTM F1554 – This specification covers straight, bent, headed, and headless anchor bolts (also known as anchor rods) made of carbon, medium carbon boron,
alloy, or…

ASTM C633 – Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings

ASTM D143 – Standard Test Methods for Small Clear Specimens of Timber

ASTM D2105 – Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” Pipe and Tube

ASTM D3032 – Standard Test Methods for Hookup Wire Insulation

Please Contact With Us For More Information

ASTM D413 – Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate

ASTM D4501 – Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method

ASTM D5528 – Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites

Composite Fracture Toughness Testing

ASTM D6252 – Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle

ASTM D7332 – Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite

Please Contact With…

ASTM E190 – Standard Test Method for Guided Bend Test for Ductility of Welds

Please…

ASTM E399 – Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials

Please Contact With…

ASTM F1554 – Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

USEFUL LINKS

OPENING HOURS