Ürünler | Page 60 of 75 | Parsros Material Testing Equipments

Joint Roughness Coefficient Tester

0 out of 5

Joint Roughness Coefficient Tester ( Tilt Tester ) measures the roughness coefficient of a rock specimen or of a joint.

The sample is usually a rock core cut in half lengthwise,…
Jolting Table

0 out of 5

STANDARDS : EN 196-1; ISO 679

Jolting Table is used for compacting of cement specimens in 40x40x160 mm mould and consists of mould table seated on a rotating cam driven at 60…
K-Slump Tester

0 out of 5

STANDARDS : ASTM C1362

K-Slump Tester is used to determine the workability and degree of compaction of fresh concrete after being placed in the forms.
Please Contact With Us For More Information
Kelly Ball Apparatus

0 out of 5

STANDARDS : ASTM C360

Apparatus consists of a 6 inch (152 mm) diameter ball which slides through a frame that rests on the fresh concrete.
Please Contact With Us For More Information
Kinematic Viscosity Apparatus

0 out of 5

STANDARDS : ASTM 2170,AASHTO T201,EN 12595

Apparatus is suitable to determine kinematic viscosity of liquid petroleum products (Newtonian liquids) at a constant temperature .
Please Contact With Us For More Information
Kleine Test Apparatus

0 out of 5

STANDARDS : TS 32,EN 459-2

Apparatus is used for the determination of the carbon dioxide in lime .

Consisting essentially of a decomposition flask 50 ml cap of an absorption vessel to…
Laboratory Asphalt Permeameters

0 out of 5

Device measure the hydraulic conductivity of saturated 6in (152mm) diameter asphalt cores or laboratory-compacted specimens using

the falling head method.
Please Contact With Us For More Information
Laboratory Ball / Rod Mill

0 out of 5

ParsRos Laboratory Ball / Rod Mill is designed to meet the industrial requirements to grind coal, cement and a wide variety of ores.

The dual duty Laboratory Grinding Mill consists of…
Laboratory Ovens

0 out of 5

STANDARDS: EN 932-5, 1097-5; ASTM C127, C136, D558, D559, D560, D698, D1557, D1559 BS 1377:1, 1924:11; UNE 103300

Laboratory Ovens have been designed for drying asphalt, soil, rock, concrete, aggregate or similar…
Laboratory Type Jaw Crusher

0 out of 5

Laboratory Type Jaw Crusher is used for crushing aggregates, core samples or similar materials in the laboratory when smaller sample sizes are required for testing.

It is a very useful for sample…
Large Capacity Sample Splitter

0 out of 5

STANDARDS : EN 932-2; ASTM C702; BS 812:1, 1377:1, 1924:1

It is used for splitting aggregate samples.
Please Contact With Us For More Information
Large Concrete Curing Tanks

0 out of 5

STANDARDS : EN 12390–2; ASTM C31, C192, C511

Curing Tanks are designed for curing concrete cubes and cylinders.
Please Contact With Us For More Information