Test Grips and Fixtures | Parsros Material Testing Equipments

ASTM D3032 – Standard Test Methods for Hookup Wire Insulation

0 out of 5

Dynamic Cut – Through Test Fixture

ASTM D3032 – This test method covers procedures for testing hookup wire.

Please Contact With Us For More Information
ASTM D4501 – Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method

0 out of 5

ASTM D4501 – Block-Shear Strength Test
ASTM D4501 – This test method describes a procedure and fixture used to determine shear strengths of adhesives used to bond materials with moduli higher than

the…
ASTM D5179 -Standard Test Method for Measuring Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method

0 out of 5

ASTM D5179 -Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method
ASTM D5179 – This test method covers the laboratory determination of organic coating adhesion to plastic substrates by mounting…
ASTM D6252 – Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle

0 out of 5

ASTM D6252 – Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle

ASTM D6252 – This test method covers the measurement of the peel adhesion of pressure-sensitive label stocks.

This test method…
ASTM D7250 – Sandwich Beam Flexural and Shear Stiffness

0 out of 5

ASTM D7250 – Sandwich Beam Flexural and Shear Stiffness

ASTM D7250 – This practice covers determination of the flexural and transverse shear stiffness properties of flat sandwich constructions subjected to flexure

in such…
ASTM D7332 – Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite

0 out of 5

Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
ASTM D7332 – This test method determines the fastener pull-through resistance of multidirectional polymer matrix composites reinforced by high-modulus fibers.

Please Contact With…
ASTM E190 – Standard Test Method for Guided Bend Test for Ductility of Welds

0 out of 5

Guided Bend Test for Ductility of Welds

ASTM E190 – This test method covers a guided bend test for the determination of soundness and ductility of welds in ferrous and nonferrous products.

Please…
ASTM E238 – Standard Test Method for Pin-Type Bearing Test of Metallic Materials

0 out of 5

Pin-Type Bearing Test of Metallic Materials
ASTM E238 – This test method covers a pin-type bearing test of metallic materials to determine bearing yield strength and bearing strength.

Please Contact With Us…
ASTM E399 – Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials

0 out of 5

ASTM E399 – Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials

ASTM E399 -This test method covers the determination of fracture toughness (KIc and optionally KIsi) of metallic materials under predominantly linear-elastic,

Please Contact With…
ISO 1926 – Tensile Properties of Rigid Cellular Plastics

0 out of 5

This ISO standard specifies a method of determining the behaviour of rigid cellular plastics materials when they are subjected to a tensile stress.

Please Contact With Us For More Information

ASTM D3032 – Standard Test Methods for Hookup Wire Insulation

Please Contact With Us For More Information

ASTM D4501 – Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method

ASTM D5179 -Standard Test Method for Measuring Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method

ASTM D6252 – Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle

ASTM D7250 – Sandwich Beam Flexural and Shear Stiffness

ASTM D7332 – Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite

Please Contact With…

ASTM E190 – Standard Test Method for Guided Bend Test for Ductility of Welds

Please…

ASTM E238 – Standard Test Method for Pin-Type Bearing Test of Metallic Materials

Please Contact With Us…

ASTM E399 – Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials

Please Contact With…

ISO 1926 – Tensile Properties of Rigid Cellular Plastics

Please Contact With Us For More Information

USEFUL LINKS

OPENING HOURS