-
ASTM A262 – Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASTM A262 – Intergranular Attack on Austenitic Steel
ASTM A262 covers a test for visually inspecting intergranular attack on stainless steel samples which have been immersed in an acid bath.
Please Contact With…
-
ASTM C1135 – Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
ASTM C1135 – This test method covers a laboratory procedure for quantitatively measuring the tensile adhesion properties of structural sealants, hereinafter
referred to as the “sealant”.
Please Contact With Us For More…
-
ASTM D3032 – Standard Test Methods for Hookup Wire Insulation
Dynamic Cut – Through Test Fixture
ASTM D3032 – This test method covers procedures for testing hookup wire.
Please Contact With Us For More Information
-
ASTM D3433 – Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
ASTM D3433 – Fracture Cleavage Adhesives Testing Machine & Fixtures
ASTM D3433 – This test method (1, 2, 3, 4, 5)2 covers the determination of fracture strength in cleavage of adhesives when tested on standard specimens
and under specified… -
ASTM D3967 – Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
ASTM D3967 – This test method covers testing apparatus, specimen preparation, and testing procedures for determining the splitting tensile strength of rock by
diametral line compression of disk shape specimens.Please Contact…
-
ASTM D4541 – Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D4541 – Tensile adhesion strength of thermal spray coatings
ASTM D4541 -This test method covers a procedure for evaluating the pull-off strength (commonly referred to as adhesion) of a coating system… -
ASTM D5179 -Standard Test Method for Measuring Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method
ASTM D5179 -Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method
ASTM D5179 – This test method covers the laboratory determination of organic coating adhesion to plastic substrates by mounting… -
ASTM D5450 – Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D5450 – This test method determines the transverse tensile properties of wound polymer matrix composites reinforced by high-modulus continuous fibers.
It describes…
-
ASTM D5458 – Standard Test Method for Peel Cling of Stretch Wrap Film
Peel Cling of Stretch Wrap Film
ASTM D5458 – This test method measures cling between two layers of film, in both a stretched and unstretched condition.
Please Contact With Us For More…
-
ASTM D6671 – Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
MIXED-MODE BENDING FRACTURE TOUGHNESS
ASTM D6671 – This test method covers the determination of interlaminar fracture toughness, Gc, of continuous fiber-reinforced composite materials at various Mode
I to Mode II loading ratios using the… -
ASTM D7250 – Sandwich Beam Flexural and Shear Stiffness
ASTM D7250 – Sandwich Beam Flexural and Shear Stiffness
ASTM D7250 – This practice covers determination of the flexural and transverse shear stiffness properties of flat sandwich constructions subjected to flexure
in such…
-
ASTM D7332 – Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
ASTM D7332 – This test method determines the fastener pull-through resistance of multidirectional polymer matrix composites reinforced by high-modulus fibers.Please Contact With…
- TR | EN
- Tel : +90 (312) 394 28 68
- WhatsApp: +90 (546) 437 05 06