-
ASTM C273 – Standard Test Method for Shear Properties of Sandwich Core Materials
ASTM C273 – This test method covers the determination of shear properties of sandwich construction core materials associated with shear distortion of
planes parallel to the facings.
Please Contact With Us For…
-
ASTM D1781 – Standard Test Method for Climbing Drum Peel for Adhesives
ASTM D1781 -This test method is used to compare adhesion between flexible and rigid adherends, or between flexible facing of a sandwich structure and its core.
Comparisons of adhesives and processes…
-
ASTM D3330 – Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
ASTM D3330 specifies several test methods for determining the peel strength of Pressure Sensitive Adhesives (PSA).
There are 6 test methods called out in the specification.
Please Contact With Us For More…
-
ASTM D3354 – Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
ASTM D3354 – This test method yields quantitative information regarding the degree of blocking (unwanted adhesion) existing between layers of plastic film.
It is not intended to measure susceptibility to blocking.
By… -
ASTM D638 – Standard Test Method for Tensile Properties of Plastics
Plastics Tensile Strength
ASTM D638 is the standard specification for plastics tensile testing.
ASTM D638 – This test method covers the determination of the tensile properties of unreinforced and reinforced plastics in the…
-
ASTM D695 – Standard Test Method for Compressive Properties of Rigid Plastics
ASTM D695 – describes a test method for rigid plastics in compression. There are a few variations in the test, depending on the size of the sample being used.
The test can be…
-
ASTM E8 – Standard Test Methods for Tension Testing of Metallic Materials
ASTM E8 – Metal Tensile Testing Grips
ASTM E8 – This test method covers the tension testing of metallic materials in any form at room temperature, specifically, the methods of determination of
yield… -
Automatic Pull Off Testers
STANDARDS : EN 1452,EN 12399,EN 12618-2,EN 13279-2,BS 1881-207,EN 13678-1
It provides you with information on both the adhesive force and the tensile strength of two layers of materials: lime, facing plasters, mortars,
building…
-
Compression Jig Assembly for Rock Core Specimens
STANDARDS : ASTM D2938
Apparatus is used for uniaxial compressive strength tests of rock core specimens with 50 to 55 mm dia. and 100 to 110 mm height
and consists of a two-column…
-
Concrete Flow Table Test Set
STANDARDS : EN 12350-5
Concrete Flow Table Test Set is used for concrete mixes of high workability and determines flow index as an arithmetic mean of the diameter of the specimen
after working…
-
Kelly Ball Apparatus
STANDARDS : ASTM C360
Apparatus consists of a 6 inch (152 mm) diameter ball which slides through a frame that rests on the fresh concrete.
Please Contact With Us For More Information
-
Length Gauge (Elongation Index BS)
STANDARDS : BS 812-105.2
Elongation Index BS, is used for determining the elongation index of aggregates.
Please Contact With Us For More Information
- TR | EN
- Tel : +90 (312) 394 28 68
- WhatsApp: +90 (546) 437 05 06