Composite Tensile Tests | Parsros Material Testing Equipments

ASTM C394 – Standard Test Method for Shear Fatigue of Sandwich Core Materials

0 out of 5

ASTM C394 – Shear Fatigue – Sandwich Core Materials
ASTM C394 – This test method determines the effect of repeated shear forces on core material used in sandwich panels.
Permissible core material forms…
ASTM D2105 – Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” Pipe and Tube

0 out of 5

ASTM D2105 – Fiberglass Tensile Test Equipment

ASTM D2105 – This test method covers the determination of the comparative longitudinal tensile properties of fiberglass pipe when tested under defined
conditions of pretreatment,…
ASTM D2861 – Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics (Withdrawn 2020)

0 out of 5

ASTM D2861 – This test method covers procedures for testing flexible materials consisting of copper foil combined with either dielectric film or with treated or
impregnated fabric to form flexible composites…
ASTM D3410 – Standard Test Method for Compressive Properties of Polymer Matrix

0 out of 5

ASTM D3410 | Composites | Shear Testing

ASTM D3410 is a testing standard designed to measure the compressive properties of polymer matrix composite materials reinforced by high-modulus fibers.

*** It is commonly used for composites…
ASTM D5528 – Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites

0 out of 5

Composite Fracture Toughness Testing

ASTM D5528 – This test method describes the determination of the opening Mode I interlaminar fracture toughness, GIc, of continuous fiber-reinforced composite
materials using the double…
ASTM D5961- Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates

0 out of 5

ASTM D5961 – This test method determines the bearing response of multi-directional polymer matrix composite laminates reinforced by high-modulus fibers

by either double-shear (Procedure A) or single-shear (Procedure B) tensile loading…
ASTM D6415 – Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite

0 out of 5

ASTM D6415- Testing Fixture

ASTM D6415 Tesing fixture is useful to indicate the curved beam strength of a continuous fiber – reinforced composite material.

For the test run it is necessary to use…
ASTM D6641 – Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture

0 out of 5

Combined loading compression test fixture
ASTM D6641 – This test method determines the compressive strength and stiffness properties of polymer matrix composite materials using a combined loading
compression (CLC) (1) 2 test fixture.

Please
ASTM D7137 – Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates

0 out of 5

Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
ASTM D7137 – This test method covers compression residual strength properties of multidirectional polymer matrix composite laminated plates

Please Contact With Us…
ISO 18352 – Compression After Impact Properties of Carbon Fibre Reinforced Plastics

0 out of 5

ISO 18352 specifies a method for determining the residual compression strength of multidirectional polymer matrix composite laminate plates that have been

damaged by impact prior to the application of in-plane compressive…

ASTM C394 – Standard Test Method for Shear Fatigue of Sandwich Core Materials

ASTM D2105 – Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” Pipe and Tube

ASTM D2861 – Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics (Withdrawn 2020)

ASTM D3410 – Standard Test Method for Compressive Properties of Polymer Matrix

ASTM D5528 – Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites

Composite Fracture Toughness Testing

ASTM D5961- Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates

ASTM D6415 – Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite

ASTM D6641 – Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture

Please

ASTM D7137 – Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates

Please Contact With Us…

ISO 18352 – Compression After Impact Properties of Carbon Fibre Reinforced Plastics

USEFUL LINKS

OPENING HOURS