-
ASTM D3167- Floating Roller Peel Test Fixture
The Floating Roller Peel Test is one of the most common procedures for testing packaging tapes since it closely simulates real world applications.
ASTM D3167 is similar to the ASTM D1781 Climbing Drum Peel…
-
ASTM D3330 – Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
ASTM D3330 specifies several test methods for determining the peel strength of Pressure Sensitive Adhesives (PSA).
There are 6 test methods called out in the specification.
Please Contact With Us For More…
-
ASTM D3354 – Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
ASTM D3354 – This test method yields quantitative information regarding the degree of blocking (unwanted adhesion) existing between layers of plastic film.
It is not intended to measure susceptibility to blocking.
By… -
ASTM D3410 – Standard Test Method for Compressive Properties of Polymer Matrix
ASTM D3410 | Composites | Shear Testing
ASTM D3410 is a testing standard designed to measure the compressive properties of polymer matrix composite materials reinforced by high-modulus fibers.
*** It is commonly used for composites…
-
ASTM D3433 – Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
ASTM D3433 – Fracture Cleavage Adhesives Testing Machine & Fixtures
ASTM D3433 – This test method (1, 2, 3, 4, 5)2 covers the determination of fracture strength in cleavage of adhesives when tested on standard specimens
and under specified… -
ASTM D3479 – Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
ASTM D3479 Tension-Tension Fatigue of Polymer Matrix Composite Materials
ASTM D3479 – This test method determines the fatigue behavior of polymer matrix composite materials subjected to tensile cyclic loading.
Please Contact With…
-
ASTM D3759 – Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes
ASTM D3759 is used to characterize the breaking strength, elongation, and “F” value of PSA tapes. Tapes are commonly pulled in the tensile mode during application
and final usage.
Please Contact…
-
ASTM D3787 Test Fixture
ASTM D3787 describes the measurement for bursting strength with a ball burst strength tester of textiles or garments that exhibit a high degree of ultimate
elongation.
Please Contact With Us For More Information
-
ASTM D3811 – Standard Test Method for Unwind Force of Pressure-Sensitive Tapes
ASTM D3811 – Tape Roll Unwind Test
ASTM D3811 characterizes a test for measuring the peak force needed to unwind a roll of pressure-sensitive adhesive (PSA) tape.
The procedure is intended to simulate…
-
ASTM D3846 Test Fixture
ASTM D3846 covers the determination of the inplane shear strength of reinforced thermosetting plastics in flat sheet form
Please Contact With Us For More Information
-
ASTM D395 – Standard Test Methods for Rubber Property — Compression Set
ASTM D395 – This test method covers the testing of rubber intended for use in applications in which the rubber will be subjected to compressive stresses in air
or liquid media.
Please
-
ASTM D3967 – Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
ASTM D3967 – This test method covers testing apparatus, specimen preparation, and testing procedures for determining the splitting tensile strength of rock by
diametral line compression of disk shape specimens.Please Contact…
- TR | EN
- Tel : +90 (312) 394 28 68
- WhatsApp: +90 (546) 437 05 06