• ISO 10319 Test Fixture

    ISO 10319 Test Fixture
    0 out of 5

    ISO 10319 describes an index test method for the determination of the tensile properties of geosynthetics (polymeric, glass, and metallic), using a wide-width strip.
    Please Contact With Us For More Information

  • Placeholder

    ISO 10328 – Structural Testing of Lower Limb Prostheses
    0 out of 5

    It Specifies procedures for static and cyclic strength tests on lower-limb prostheses  which typically produce compound loadings by the application

    of a single test force.
    Please Contact With Us For More Information

  • ISO 10477 – Polymer Based Crown and Veneering Materials

    ISO 10477 – Polymer Based Crown and Veneering Materials
    0 out of 5

    ISO 10477 classifies polymer-based crown and veneering materials used in dentistry and specifies their requirements.
    Please Contact With Us For More Information

  • Placeholder

    ISO 1099 Test Fixture
    0 out of 5

    This ISO standard specifies the conditions for carrying out axial, constant-amplitude, force-controlled fatigue tests at ambient temperature on metallic specimens,

    without deliberately introduced stress concentrations.
    Please Contact With Us For More Information

  • ISO 11040 Fixtures

    ISO 11040-4 Fixtures
    0 out of 5

    This ISO standard applies to Tubing-glass barrels (single-chamber design) for injection preparations, and sterilized subassembled syringes ready for filling.
    Please Contact With Us For More Information

  • ISO 1608 Test FixturesISO 11608-3 Needle Based Injection System Testing 3

    ISO 11608-3 Needle Based Injection System Testing
    0 out of 5

    ISO 11608-3 specifies the functional and design considerations for containers to be used with needle-based injection systems (NIS) that fulfil the specifications

    of ISO 11608-1.
    Please Contact With Us For More Information

  • ISO 11644 – Test for Adhesion of FinishISO 11644 Test Fixture

    ISO 11644 – Test for Adhesion of Finish
    0 out of 5

    ISO 11644 specifies a method for measuring the adhesion of the finish to leather or the adhesion between two adjacent layers of the finish.
    Please Contact With Us For More Information

  • Placeholder

    ISO 11782 – A Metal Corrosion Fatigue Testing
    0 out of 5

    ISO 11782 provides instruction on corrosion fatigue testing of metals and alloys in aqueous or gaseous environments and is concerned with cycles to failure testing.
    Please Contact With Us For More Information

  • Placeholder

    ISO 12106 – Metallic Materials Axial-Strain-Control Fatigue Testing
    0 out of 5

    ISO 12106 specifies a method of testing uniaxially loaded specimens under strain control at constant amplitude, uniform temperature and a strain ratio of

    R = -1. Low cycle fatigue tests.
    Please Contact With…

  • Placeholder

    ISO 12108 Test Fixture
    0 out of 5

    ISO 12108 describes tests for determining the fatigue crack growth rate from the fatigue crack growth threshold stress-intensity factor range to the onset of rapid,

    unstable fracture.
    Please Contact With Us For More…

  • Placeholder

    ISO 12111- Strain Controlled Thermomechanical Fatigue Testing Method of Metals
    0 out of 5

    ISO 12111 is applicable to the TMF testing of uniaxially loaded metallic specimens under strain control.
    Please Contact With Us For More Information

  • Placeholder

    ISO 12135 Test Fixture
    0 out of 5

    ISO 12135 specifies methods for determining fracture toughness in terms of K, ?, J and R-curves for homogeneous metallic materials subjected to quasistatic loading.
    Please Contact With Us For More Information