-
ASTM A370 – Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A370 – Mechanical Test Methods for Steel
ASTM A370- These test methods 2 cover procedures and definitions for the mechanical testing of steels, stainless steels, and related alloys.
The various mechanical tests herein…
-
ASTM C393 – Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM C393 specifies a bend testing procedure for sandwich constructions of composite materials in order to analyze the shear…
-
ASTM D2519 – Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
Bond Strength Test Fixture
ASTM D2519 – This test method covers determination of the bond strength of an electrical insulating varnish when applied to a helical coil.
Please Contact With Us…
-
ASTM D3330 – Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
ASTM D3330 specifies several test methods for determining the peel strength of Pressure Sensitive Adhesives (PSA).
There are 6 test methods called out in the specification.
Please Contact With Us For More…
-
ASTM D3479 – Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
ASTM D3479 Tension-Tension Fatigue of Polymer Matrix Composite Materials
ASTM D3479 – This test method determines the fatigue behavior of polymer matrix composite materials subjected to tensile cyclic loading.
Please Contact With…
-
ASTM D3759 – Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes
ASTM D3759 is used to characterize the breaking strength, elongation, and “F” value of PSA tapes. Tapes are commonly pulled in the tensile mode during application
and final usage.
Please Contact…
-
ASTM D3811 – Standard Test Method for Unwind Force of Pressure-Sensitive Tapes
ASTM D3811 – Tape Roll Unwind Test
ASTM D3811 characterizes a test for measuring the peak force needed to unwind a roll of pressure-sensitive adhesive (PSA) tape.
The procedure is intended to simulate…
-
ASTM D3967 – Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
ASTM D3967 – This test method covers testing apparatus, specimen preparation, and testing procedures for determining the splitting tensile strength of rock by
diametral line compression of disk shape specimens.Please Contact…
-
ASTM D412 – Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D412 Rubber Tensile Test Fixture
ASTM D412 – This test method covers procedures used to evaluate the tensile (tension) properties of vulcanized thermoset rubbers and thermoplastic elastomers.
These methods are not applicable… -
ASTM D6195 – Standard Test Methods for Loop Tack
ASTM D6195 specifies a few procedures to measure quick stick adhesive strength.
This test is different from a peel test because the tape is not given enough time or pressure to fully…
-
ASTM D638 – Standard Test Method for Tensile Properties of Plastics
Plastics Tensile Strength
ASTM D638 is the standard specification for plastics tensile testing.
ASTM D638 – This test method covers the determination of the tensile properties of unreinforced and reinforced plastics in the…
-
ASTM D897 Test Fixture
ASTM D897 Tensile Strength Test Equipment for Metal to Metal Adhesive Bonds
ASTM D897 – This test method covers the determination of the comparative tensile properties of the adhesive bonds of metal…
- TR | EN
- Tel : +90 (312) 394 28 68
- WhatsApp: +90 (546) 437 05 06