EN TEST STANDARDS
EN TEST STANDARDS
EN 3-8 / DIN EN 3-8 : Portable fire extinguishers – Part 8: Requirements for the construction, pressure resistance and mechanical tests for extinguishers with a
maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 3-7
EN 149 : Respiratory protective devices, filtering half masks to protect against particles
EN 178 / DIN EN ISO 178 : Plastics — Determination of flexural properties
EN 196-1 : Methods of testing cement – Part 1: Determination of strength.
EN 302-3 / DIN EN 302-3 : Adhesives for load-bearing timber structures – Test methods – Part 3:
Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
EN 306 / DIN EN ISO 306 : Plastics – Thermoplastic materials – Determination of Vicat softening temperature (VST)
EN 310 / DIN EN 310 : Wood-based panels; determination of modulus of elasticity in bending and of bending strength
EN 311 / DIN EN 311 : Wood-based panels – Surface soundness – Test method
EN 314-1 / DIN EN 314-1 : Plywood – bonding quality: part 1: test methods
EN 319 / DIN EN 319 : Particleboards and fibreboards; determination of tensile strength perpendicular to the plane of the board
EN 320 / DIN EN 320 : Particleboards and fibreboards – Determination of resistance to axial withdrawal of screws
EN 388 / DIN EN 388 : Protective gloves against mechanidal risks
EN 392 / DIN EN 392 : Glued laminated timber – Shear test glue lines
EN 408 /DIN EN 408 : Timber structures – Structural timber and glued laminated timber – Determination of some physical and mechanical properties
EN 408 /DIN EN 408 : Timber structures – Structural timber and glued laminated timber – Determination of some physical and mechanical properties
EN 433 /DIN EN 433 : Resilient floor coverings – Determination of residual indentation after static loading
EN 455 /DIN EN 455 : Medical Gloves for Single-Use
EN 488 / DIN EN 488 : District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks
EN 520 /DIN EN 520 : Gypsum plasterboards – Definitions, requirements and test methods.
EN 527-2 / DIN EN ISO 527-2 : Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
EN 527-3 / DIN EN ISO 527-3 : Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets
EN 582 /DIN EN 582 : Thermal spraying; determination of tensile adhesive strength
EN 604 / DIN EN ISO 604 : Plastics – Determination of compressive properties
EN 789 /DIN EN 789 : Timber structures – Test methods – Determination of mechanical properties of wood based panels
EN 813/ DIN ISO 813 : Determination of adhesion to a rigid substrate – 90 degree peel method
EN 826 / DIN EN 826 : Thermal insulating products for building applications – Determination of compression behaviour
EN 843-1- / DIN EN 843-1-1 : Advanced technical ceramics – Mechanical properties of monolithic ceramics at room temperature – Part 1: Determination of flexural strength
EN 844 / DIN EN ISO 844 : Rigid cellular plastics —Determination of compression properties
EN 863 / DIN EN 863 : Protective clothing – Mechanical properties – Test method: Puncture resistance
EN 868-5 / DIN EN 868-5 : Packaging for terminally sterilized medical devices – Part 5: Sealable pouches and reels of porous materials and plastic film construction
EN 898-1 / DIN EN ISO 898-1 : Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1: Bolts, screws and studs with specified property
classes — Coarse thread and fine pitch thread
EN 898-2 / DIN EN ISO 898-2 : Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes
— Coarse thread and fine pitch thread
EN 1062-7 : Paints and varnishes – Coating materials and coating systems for exterior masonry and concrete – Part 7: Determination of crack bridging properties
EN 1170-4 / DIN EN 1170-4 : Precast concrete products – Test method for glass-fibre reinforced cement – Part 4: Measuring bending strength; “simplified bending test” method
EN 1170-5 : Precast concrete products. Test method for glass-fibre reinforced cement Measuring bending strength, “complete bending test” method
EN 1279-4 / DIN EN 1279-4 : Glass in building – Insulating glass units – Part 4: Methods of test for the physical attributes of edge seal components and inserts
EN 1288-3 / DIN EN 1288-3 : Glass in building – Determination of the bending strength of glass – Part 3: Test with specimen supported at two points (four point bending
EN 1293 / DIN EN 1293 : General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers
EN 1324 /DIN EN 1324 : Adhesives for tiles – Determination of shear adhesion strength of dispersion adhesives
EN 1348 /DIN EN 1348 : Adhesives for tiles – Determination of tensile adhesion strength for cementitious adhesives
EN 1372 /DIN EN 1372 : Test method for adhesives for floor and wall coverings – Peel test
EN 1382 : Timber structures – Test methods – Withdrawal capacity of timber fasteners Nail extract test – to find out pull off force of a nail from wood
EN 1464 /DIN EN 1464 : Adhesives – Determination of peel resistance of adhesive bonds – Floating roller method
EN 1465 /DIN EN 1465 : Adhesives – Determination of tensile lap-shear strength of bonded assemblies
EN 1542 : Products and systems for the protection and repair of concrete structures – Test methods – Measurement of bond strength by pull-off
EN 1607 /DIN EN 1607 : Thermal insulating products for building applications – Determination of tensile strength perpendicular to faces
EN 1608 /DIN EN 1608 : Thermal insulating products for building applications – Determination of tensile strength parallel to faces
EN 1719 /DIN EN 1719 : Adhesives for paper and board, packaging and disposable sanitary products – Tack measurement for pressure sensitive adhesives –
Determination of loop tack
EN 1922 / DIN EN ISO 1922 : Determination of shear properties
EN 1927-6 / DIN EN ISO 1927- 6 : Monolithic (unshaped) refractory products – Part 6: Measurement of physical properties. 6. Determination of cold crushing strength.
EN 1939 / DIN EN 1939 : Self adhesive tapes – Determination of peel adhesion properties
EN 2039-1 / DIN EN ISO 2039- 1 : Plastics – Determination of hardness – Part 1: Ball indentation method
EN 2243-2 / DIN EN 2243-2 : Aerospace series – Non-metallic materials – Structural adhesives – Test method – Part 2: Peel metal-metal
EN 2243-3 / DIN EN 2243-3 : Aerospace series – Non-metallic materials – Structural adhesives – Test method – Part 3: Peeling test metal- honeycomb core
EN 2243-4 / DIN EN 2243-4 : Aerospace series – Non-metallic materials – Structural adhesives – Test method – Part 4: Metal-honeycomb core flatwise tensile test
EN 2377/ DIN EN 2377 : Aerospace series; glass fibre reinforced plastics; test method; determination of apparent interlaminar shear strength
EN 2439 / DIN EN ISO 2439 : Flexible cellular polymeric materials — Determination of hardness (indentation technique)
EN 2562 / DIN EN 2562 : Aerospace series – Carbon fibre reinforced plastics – Unidirectional laminates; flexural test parallel to the fibre direction
EN 2563 /DIN EN 2563 : Aerospace series – Carbon fibre reinforced plastics – Unidirectional laminates; determination of apparent interlaminar shear strength
EN 2759 / DIN EN ISO 2759 : Board – Determination of bursting strength
EN 3037 / DIN EN ISO 3037 : Corrugated fibreboard — Determination of edgewise crush resistance (unwaxed edge method)
EN 3303-1 / DIN EN ISO 3303- 1 : Bursting strength of rubber- or plastics-coated fabrics – Part 1: Steel- ball method
EN 3327 / DIN EN ISO 3327 : Hardmetals – Determination of transverse rupture strength
EN 3377- 2 / DIN EN ISO 3377- 2 : Leather – Physical and mechanical tests – Determination of tear load – Part 2: Double edge tear
EN 3379 / DIN EN ISO 3379 : Leather – Determination of distension and strength of surface (Ball burst method)
EN 3386-1 / DIN EN ISO 3386- 1 : Polymeric materials, cellular flexible – Determination of stress-strain characteristics in compression -Part 1: Low-density materials
EN 3651-2 / DIN EN ISO 3651- 2 : Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic
(duplex) stainless steels — Corrosion test in media containing sulfuric acid
EN 4624 / DIN EN ISO 4624 : Paints and varnishes – Pull-off test for adhesion
EN 5173 / DIN EN ISO 5173 : Destructive tests on welds in metallic materials – Bend tests
EN 6259-1 / EN ISO 6259−1 : Thermoplastics pipes – Determination of tensile properties – Part 1: General test method
EN 6259-3 / DIN EN ISO 6259- 3 : Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes
EN 6507-2 / DIN EN ISO 6507- 2 : Metallic materials – Vickers hardness test – Part 2: Verification and calibration of testing machines
EN 6872 / DIN EN ISO 6872 : Dentistry – Ceramic materials
EN 6892 / DIN EN ISO 6892 : Metallic materials – Tensile testing – Part 1: Method of test at room temperature
EN 7389 / DIN EN ISO 7389 : Building construction – Jointing products – Determination of elastic recovery of sealants
EN 7438 / DIN EN ISO 7438 : Metallic materials — Bend test
EN 7808 / DIN EN ISO 7808 : Plastics – Thermosetting moulding materials – Determination of transfer flow
EN 7864 / DIN EN ISO 7864 : Tensile test fixture to test sterile hypodermic needles
EN 7886-1 / DIN EN ISO 7886- 1 : Sterile hypodermic syringes for single use – Part 1: Syringes for manual use
EN 8295 / DIN EN ISO 8295 : Plastics – Film and sheeting – Determination of the coefficients of friction
EN 8339 / DIN EN ISO 8339 : Building construction – Sealants – Determination of tensile properties (Extension to break)
EN 8340 / DIN EN ISO 8340 : Determination of tensile properties at maintained extension
EN 8493/ DIN EN ISO 8493 : Metallic materials – Tube – Drift- expanding test
EN 8493 DIN EN ISO8493 : Metallic materials – Tube – Drift- expanding test
EN 8895 / DIN EN ISO 8895 : Shaped insulating refractory products – Determination cold crushing strength
EN 9046 / DIN EN ISO 9046 : Building construction – Jointing products – Determination of adhesion/cohesion properties of sealants at constant temperature
EN 9073-5 / DIN EN ISO 9073- 5 : Textiles – Test methods for nonwovens – Part 5: Determination of resistance to mechanical penetration (ball burst procedure)
EN 9073-7 / DIN EN ISO 9073- 7 : Textiles – Test methods for nonwovens – Part 7: Determination of bending length
EN 9187-1 / DIN EN ISO 9187- 1 : Injection equipment for medical use – Part 1: Ampoules for injectables
EN 9073-18 / DIN EN ISO 9073- 18 : Textiles — Test methods for nonwovens — Part 18: Determination of breaking strength and elongation of nonwoven materials using
the grab tensile test
EN 9626 DIN EN ISO 9626 : Stainless steel needle tubing for the manufacture of medical devices – Requirements and test methods
EN 9665 / DIN EN ISO 9665 : Adhesives – Animal glues – Methods for sampling and testing
EN 9836-1 / DIN EN ISO 9836- 1 : Geosynthetics – Determination of thickness at specified pressures – Part 1: Single layers
EN 10080/ DIN EN 10080 : Steel for the reinforcement of concrete – Weldable reinforcing steel – General
EN 10130 / DIN EN 10130 : Cold rolled low carbon steel flat products for cold forming – Technical delivery conditions
EN 10223-3 / DIN EN 10223-3 : Steel wire and wire products for fencing and netting – Part 3: Hexagonal steel wire mesh products for civil engineering purposes
EN 10223-8 / DIN EN 10223-8 : Steel wire and wire products for fencing and netting – Part 8: Welded mesh gabion products
EN 10319 / DIN EN ISO 10319 : Metallic materials – Tensile stress relaxation testing – Part 1: Procedure for testing machines
EN 10354 / DIN EN ISO 10354 : Adhesives – Characterization of durability of structural-adhesive- bonded assemblies – Wedge rupture test
EN 10477 / DIN EN ISO 10477 : Dentistry – Polymer-based crown and veneering materials
EN 10545 / DIN EN ISO 10545 : Ceramic tiles – Part 2: Determination of dimensions and surface quality
EN 11542-2 / DIN EN ISO 11542-2 : Plastics – Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials – Part 2: Preparation of test specimens
and determination of properties
EN 11608-3 / DIN EN ISO 11608-3 : Needle-based injection systems for medical use – Requirements and test methods – Part 3: Finished containers
EN 11644 / DIN EN ISO 11644 : Leather – Test for adhesion of finish
EN 11979-3 / DIN EN ISO 11979-3 : Ophthalmic implants – Intraocular lenses – Part 3: Mechanical properties and test methods. Compression test.
EN 12002/ DIN EN 12002 : Adhesives for tiles – Determination of transverse deformation for cementitious adhesives and grouts
EN 12003 /DIN EN 12003 : Adhesive for tiles – Determination of shear adhesion strength of reaction resin adhesives
EN 12004 / DIN EN 12004 : Adhesives for tiles – Requirements, evaluation of conformity, classification and designation
EN 12089 /DIN EN 12089 : Thermal insulating products for building applications – Determination of bending behaviour
EN 12090 /DIN EN 12090 : Shear properties of sandwich core materials
EN 12190 /DIN EN 12190 : Determination of compressive strength of repair mortar
EN 12192 / DIN EN ISO 12192 : Paper and board — Determination of compressive strength — Ring crush method
EN 12230 /DIN EN 12230 : Surfaces for sports areas. Determination of tensile properties of synthetic sports surfaces
EN 12236 / DIN EN ISO 12236 : Static puncture test on geotextiles
EN 12242 /DIN EN 12242 : Touch and close fasteners – Determination of peel strength
EN 12259-1 / DIN EN 12259-1 : Fixed firefighting systems – Components for sprinkler and water spray systems – Part 1: Sprinklers
EN 12277 : Specifies safety requirements and test methods for harnesses for use in mountaineer-ing including climbing. It is applicable to full body harnesses,
small body harnesses, sit harnesses and chest har-nesses
EN 12310-1 / DIN EN 12310-1 : Flexible sheets for waterproofing – Part 1: Bitumen sheets for roof waterproofing; determination of resistance to tearing (nail shank).
EN 12311-2 / DIN EN 12311-2 : Flexible sheets for waterproofing – Determination of tensile properties – Part 2: Plastic and rubber sheets for roof waterproofing
EN 12372 /DIN EN 12372 : Natural stone test methods – Determination of flexural strength under concentrated load
EN 12402-Fig1 / DIN EN ISO 12402-Fig1 : Standard for personal flotation devices
EN 12430 /DIN EN 12430 : Thermal insulating products for building applications – Determination of behaviour under point load
EN 12431 /DIN EN 12431 : Thermal insulating products for building applications. Determination of thickness for floating floor insulating products
EN 12467 /DIN EN 12467 : Fibre-cement flat sheets – Product specification and test methods
EN 12625-5 / DIN EN ISO 12625-5 : Tissue paper and tissue products – Part 5: Determination of wet tensile strength
EN 12625-9 / DIN EN ISO 12625-9 : Tissue paper and tissue products – Part 9: Determination of ball burst strength
EN 12773 /DIN EN 12773 : Footwear – Test methods for outsoles – Needle tear strength
EN 12814-1 : Testing of welded joints of thermoplastics semi-finished products – Part 1: Bend test
EN 12814-2 / DIN EN 12814-2 : Testing of welded joints of thermoplastics semi-finished products – Part 2: Tensile test
EN 12814-4 / DIN EN 12814-4 : Testing of welded joints of thermoplastics semi-finished products – Part 4: Peel tes
EN 13007 /DIN EN 13007 : Ceramic tiles – Grouts and adhesives – Part 1: Terms, definitions and specifications for adhesives
EN 13055-1 / DIN EN 13055-1 : Lightweight aggregates – Part 1: Lightweight aggregates for concrete, mortar and grout
EN 13230-2 : Railway applications. Track. Concrete sleepers and bearers. Prestressed monoblock sleepers
EN 13286 : Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Proctor compaction
EN 13286-42 : Unbound and hydraulically bound mixtures. Test method for the determination of the indirect tensile strength of hydraulically bound mixtures
EN 13354 / DIN EN 13354 : Solid wood panels (SWP) – Bonding quality
EN 13393 /DIN EN 13393 : Packaging – Specification for edge protectors
DIN 13446 / DIN EN 13446 : Wood-based panels – Determination of withdrawal capacity of fasteners
EN 13503-2 / DIN EN ISO 13503-2 : Petroleum and natural gas industries – – Completion fluids and materials – Part 2: Measurement of properties of proppants used in hydraulic
fracturing and gravel-packing operations
EN 13523-1 / DIN EN 13523-1 : Coil coated metals – Test methods – Part 1: Film thickness
EN 13555 /DIN EN 13555 : Flanges and their joints – Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
EN 13572 /DIN EN 13572 : Footwear – Test methods for uppers, lining and insocks – Seam strength
EN 13693 /DIN EN 13693 : Precast concrete products – Special roof elements
EN 13880-10 : Determination of adhesion and cohesion following continuous extension and compression
EN 13880-13 : Determining the extensibility and the adhesion to concrete of hot applied sealant-systems with or without priming simulating the moving of concrete pavement
slabs during cooling conditions in wintertime
EN 13892-2 / DIN EN1 3892-2 : Methods of test for screed materials – Part 2: Determination of flexural and compressive strength
EN 13934 / DIN EN ISO 13934 : Textiles – Tensile properties of fabrics – Part 1: Determination of maximum force and elongation at maximum force using the strip method
EN 13936-1 / DIN EN ISO 13936-1 : Textiles – Determination of the slippage resistance of yarns at a seam in woven fabrics – Part 1: Fixed seam opening method
EN 13936-2 / DIN EN ISO 13936-2 : Textiles – Determination of the slippage resistance of yarns at a seam in woven fabrics – Part 2: Fixed load method
EN 13936-3 / DIN EN ISO 13936-3 : Textiles – Determination of the slippage resistance of yarns at a seam in woven fabrics – Part 3: Needle clamp method
EN 14024 /DIN EN 14024 : Metal profiles with thermal barrier. Mechanical performance. Requirements, proof and tests for assessment
EN 14080 /DIN EN 14080 : Timber structures – Glued laminated timber and glued solid timber – Requirements Timber structures – Glued laminated timber and glued solid timber
– Requirements
EN 14125 / DIN EN ISO 14125 : Fibre-reinforced plastic composites – Determination of flexural properties
EN 14126 / DIN EN ISO 14126 : Fibre-reinforced plastic composites – Determination of compressive properties in the in-plane direction
EN 14130 / DIN EN ISO 14130 : Fibre reinforced plastic composites – Determination of apparent interlaminar shear strength by short beam-method
EN 14224 : Determining the crack bridging ability of reinforced bitumen sheets used in waterproofing systems on concrete bridge decks and other areas of concrete
trafficable by vehicles
EN 14272 / DIN EN ISO 14272 : Resistance welding – Destructive testing of welds – Specimen dimensions and procedure for cross tension testing of resistance spot and
embossed projection welds
EN 14279 /DIN EN 14279 : Laminated Veneer Lumber (LVL) – Definitions, classification and specifications
EN 14410 /DIN EN 14410 : Self adhesive tapes – Measurement of breaking strength and elongation at break
EN 14444 / DIN EN 14444 : Structural adhesives – Qualitative assessment of durability of bonded assemblies – Wedge rupture test
EN 14477 /DIN EN 14477 : Packaging, Flexible packaging material – Determination of puncture resistance – Test methods
EN 14509 /DIN EN 14509 : Self-supporting double skin metal faced insulating panels – Factory made products – Specifications
EN 14555 / DIN EN ISO 14555 : Welding – Arc stud welding of metallic materials
EN 14704-1 / DIN EN 14704-1 : Determination of the elasticity of fabrics – Part 1: Strip tests
EN 14801 / DIN EN ISO 14801 : Dentistry – Implants – Dynamic loading test for endosseous dental implants
EN 14891 / DIN EN 14891 : Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives. Requirements, test methods, assessment
and verification of constancy of performance, classification and marking
EN 14916 / DIN EN ISO 14916 : Thermal spraying – Determination of tensile adhesive strength
EN 15048-1 / DIN EN 15048-1 : Non-preloaded structural bolting assemblies – Part 1: General requirements
EN 15630-2 / DIN EN ISO 15630-2 : Steel for the reinforcement and prestressing of concrete – Test methods – Part 2: Welded fabric and lattice girder
EN 16758 : Curtain walling – Determination of the strength of shear connections
EN 17192 : Ductwork – Non-metallic ductwork – Requirements and test methods
EN 17271 /DIN EN 17271 : Plastics – Poly(vinyl chloride) (PVC) based profiles – Determination of the peel strength of profiles laminated with foils
EN 17333-4 / DIN EN 17333-4 : Characterization of One Component Foam (OCF) – Part 1: Yield Measurement of the tensile strength of polyurethane foam
Charakterisierung von Einkomponentenschäumen Messung der Zugfestigkeit von Polyurethanschaum
EN 17697 / DIN EN ISO 17697 : Footwear – Test methods for uppers, lining and insocks – Seam strength
EN 20126 / DIN EN ISO 20126 : Dentistry — Manual toothbrushes — General requirements and test methods
EN 20344 / EN ISO 20344 : Personal protective equipment. Test methods for footwear
EN 20482 / DIN EN ISO 20482 : Testing of metals; Erichsen cupping test on sheet and strip metal having a width of >= 90 mm; Thickness range: 0.2 mm to 2 mm
EN 20795-1 / DIN EN ISO 20795-1 : Dentistry – Artificial teeth for dental prostheses
EN 20932-1 / EN ISO 20932-1: Textiles. Determination of the elasticity of fabrics. Strip tests.
EN 21182 / DIN EN ISO 21182 : Light conveyor belts – Determination of the coefficient of friction
EN 22112 / DIN EN ISO 22112 : Dentistry – Artificial teeth for dental prostheses
EN 22254 / DIN EN ISO 22254 : Dentistry – Manual toothbrushes – Resistance of tufted portion to deflection
EN 23910 / DIN EN ISO 23910 : Leather – Physical and mechanical tests – Measurement of stitch tear resistance
EN 23936-2-B.2 / DIN EN ISO 23936-2-B.2 : Petroleum, petrochemical and natural gas industries – Non-metallic materials in contact with media related to oil
and gas production – Part 2: Elastomers
EN 28510-1 / DIN EN 28510-1 : Adhesives – Peel test for a flexible- bonded-to-rigid test specimen assembly – Part 1: 90° peel
EN 29022 / DIN EN ISO 29022 : Dentistry – Adhesion – Notched-edge shear bond strength test
EN 29862 / DIN EN ISO 29862 : Self adhesive tapes – Determination of peel adhesion properties
EN 29864 / EN ISO 29864- Method-B : Self adhesive tapes – Measurement of breaking strength and elongation at break
EN 50146 /DIN EN 50146 : Cable ties for electrical installations
EN 50342-5 / DIN EN5 0342-5 : Lead-acid starter batteries – Part 5: Properties of battery housings and handles
EN 60793-1-32 / DIN EN/IEC 60793-1-32 : Optical fibres – Part 1-32: Measurement methods and test procedures – Coating strippability
EN 60811-3-2 : Amendment 2 – Insulating and sheathing materials of electric and optical cables – Common test methods – Part 3-2: Methods specific
to PVC compounds – Loss of mass test – Thermal stability test
EN 60811-501 : Electric and optical fibre cables – Test methods for non-metallic materials – Part 501: Mechanical tests – Tests for determining the mechanical
properties of insulating and sheathing compounds
EN 61061-1 / DIN EN 61061-1 : Non-impregnated densified laminated wood for electrical purposes – Part 1: Definitions, designation and general requirements
EN 61386-1 / DIN EN 61386-1 : Conduit systems for cable management – Part 1: General requirements
